U-Joint Removing/Installing Tool No. OTC-7248 U-Joint Removing/Installing Tool Features: This helpful tool uses a forcing-screw press to safely remove and replace automotive universal joints with needle bearings, including GM plastic pin CV U-joints. With this rugged C-frame press, you can easily remove stubborn and rusted brake anchor pins form spyders on heavy duty vehicles. Mechanical screw power does the job quickly and efficiently.
9/16in-12NC Re-threading Hexagon (HCS) Fractional Right Hand Die No. AHN-7248 9/16in-12NC Re-threading Hexagon (HCS) Fractional Right Hand Die 9/16in-12NC Re-threading Hexagon (HCS) Fractional Right Hand Die NOTE: 7220 Shown for Illustrative purposes. Features: Re-threading Hexagon Fractional Right Hand Die, High Carbon Steel Designed for repairing damaged bolts and studs Made in the USA Limited Lifetime Warranty Available Sizes & Specifications: NC = National Coarse (USS) NF = National Fine (SAE) NS = National Special NEF = National Extra Fine NPT = National Pipe Taper BSP = British Standard Pipe
• Sizes Ideal for heavy duty applications • Simply select the sleeve for the size required, place it on one of the master punches for that range and it is ready to use • 1/2in -1” range in 1/64” • 36 piece set 3 master punches and 33 individually sized sleeves • Each sleeve and punch is clearly laser etched with its size • Simply select the sleeve for the size required, place it on one of the master punches for that range and it is ready to use • Punches and sleeve ranges are color coded for easy pairing • Heavy duty for larger applications • Punch tips are hardened 48-55 HRC • Master punches are 4-7/8” in length and sleeves are 1” in length • 1/4 the weight of a conventional transfer punch set with this range (approximately 4.5lbs) • Supplied in a fitted, shop hardened case
• 4pc. Deburring Cutter Set features four separate color coded cutters. Each color indicates the material that the cutter is intended for. • Colored sleeves rotate to lock and unlock blades for easy changing. • Unique rounded head blades for safe deburring of drilled and machined holes, end milled areas, tubing, backside of holes and an almost unlimited amount of uses. • Curved blades swivel freely to automatically follow shapes, contours and holes.
• "Quick-change" thumb operated button for instant removal, insertion and locking of new blades. • Supplied with three blades: 1) for steel and aluminum, 2) for brass and cast iron, 3) for straight edges on all types of metals. • Hollow handle with a removable end cap for storage of blades. • Unique rounded head blades for safe deburring of drilled and machined holes, end milled areas, tubing, backside of holes and an almost unlimited amount of uses. • Curved blades swivel freely to automatically follow shapes, contours and holes. • Molded to comfortably fit the user's hand without slippage or fatigue.
• 28 Piece Transfer Punch Set supplied with index stand • Punches are made of hardened and tempered tool steel, black oxide finished. • All sizes are marked and diameters are slightly undersized for easy handling. • Sizes range from 3_32" to 1_2" by 64ths and 17_32"
19in. Industrial Tool Box Features:Durable construction Durable baked epoxy finish ensures resistance to rust and abrasionFull-width piano hinge Heavy-duty handles on tote tray and box Weather-resistant, watershed design Heavy plated latches Specifications:Overall: 19in. W x 6in. D x 5in. H Storage Capacity: 550 cu. in. Load Rating: 80 lbs. Shipping Weight: 4 lbs. Gauge Steel:Lid/Contour: 26 Ga. Side Wall: 24 Ga.
Scraper – 3/4in. Features: Used for a multitude of applications, such as removing gaskets, rust, paint, carbon buildup, and floor tile Oldforge scrapers are made from forged alloy heat-treated steel and will not warp or bend under normal use. Blades are ground for a sharp edge and can be resharpened after heavy use to return the cutting edge to sharpness Available in straight and curved blades The finish is a durable oxide for additional rust protection Study, durable polymer handles Made in the USALifetime Warranty
9/16in-12NC Deep Well ThreadChaser (4-pack) NOTE: Similar Item AHN-57343 Shown for Illustrative Purposes. The IRWIN® HANSON® Deep Well ThreadChaser allows you to reach and repair threads that your current tools can’t touch. Whether you’re repairing wheel studs, bolts, or other fasteners, the Deep Well ThreadChaser will fix your threads quickly and correctly. Features:Reduced profile head enables use in confined spaces Rethread design repairs & cleans bent, dented, rusted, painted, or damaged threads Deep well design fits over exposed studs and repairs the full length Tougher than tool steel, high carbon steel ensures longer life and greater durability Made in the USA Limited Lifetime Warranty Available Sizes & Specifications: NC = National Coarse (USS) NF = National Fine (SAE) NS = National Special NEF = National Extra Fine NPT = National Pipe Taper BSP = British Standard Pipe
Ball Joint Service Tool Kit No. OTC-7249 Press Fit Ball Joint Service Tools Set The tools in this set will press in, or out, most sizes of press-fit ball joints. Plus, the C-frame press can be used alone to remove and replace universal joints. Features: Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins. Contains: 3 receiver tubes (2-3/4in I.D. x 3in O.D., 2-1/4in I.D. x 2-1/2in O.D., and 1-3/4in I.D. x 2in O.D.) Installation and removing adapters: 1 PC installing cup, 1 PC receiving cup, 1 PC installing adapter. Packaged In Blow molded carrying case Made in USA Kit Includes: No. OTC-7248 – C-frame press. Jaw opens to 6.4in. No. OTC-29503 – Receiver tube (3in O.D. x 2-3/4in I.D.). No. OTC-29504 – Receiver tube (2-1/2in O.D. x 2-1/4in I.D.). No. OTC-29505 – Receiver tube (2in O.D. x 1-3/4in I.D.). No. OTC-305227 – Installing adapter. No. OTC-305228 – Removing adapter. No. OTC-7249-BOXA – Plastic carrying case only.
Ford Ball Joint Adapter Update Kit No. OTC-6731 Ford Ball Joint Adapter Update Kit Ford Ball Joint Adapter Update Kit Applications: Three piece kit contains specialty ball joint adapters for use with the industry standard OTC 7248 C-Frame and designed to work with the following Ford vehicles: Ford F-150 1997-2003 F-250 1997-2004 F-350 1992-2004 F-450 1999-2002 F-550 1999-2002 Ford Excursion 2000-2004 Ford Expedition 1997-2002 Ford Explorer 1995-2004 Ford Ranger 1998-2004
Ball Joint Adapter C-Frame Update Kit Features:Kit contains two adapters which, when coupled with the large C-frame included in OTC No. 8031 SUV Ball Joint Kit, make it possible to use any adapter designed for use with the smaller OTC No. 7248 C-frame.