90-minute timer switch

Caterpiller ACERT Engine Application Card
Code: MPI-807024

options) Low speed range axle ratio High speed range axle ratio Eaton Top 2 override with cruise switch PTO engine RPM set speed A PTO engine RPM set speed B Theft deterrent status...

Quantity:

DDEC Suite for IQ III, IV and V
Code: MPI-888015

RPM Transmission Type Data Pages J1922 ABS Communications J1922 Transmission Communications J1939 Communications Water Pressure Governor Air Pressure Governor A/C Fan Timer Low Gear Torque...

Quantity:

40 Amp Parallel Charger w/Timer, for 12 Volt Batteries
Code: SOL-L1240T

40 Amp Parallel Charger w/Timer, for 12 Volt Batteries No. SOL-L1240T 40 Amp Parallel Charger w/Timer, for 12 Volt Batteries 40 Amp Parallel Charger w/Timer, for 12 Volt...

Quantity:

PROMO 0-60/250 Amp 6/12v Automatic/Manual Charger/Starter/Tester w/Timer & SOL-4410
Code: SOL-OS6140

Amps and features the convenience of 10 automatic charging in 12 Volt mode. Plus, when the timer is used in 12V mode, the unit switches to 10A auto operation at the end of the...

Quantity:

Pro-Link IQ Software - Cat Engines w/ACERT Technology
Code: MPI-880024

Pressure Test Intake Valve Actuator Solenoid Test Cylinder Cutout Test Special Tests Engine Shutdown Output Tachometer Circuit Auxiliary Brake PTO Switch On Lamp Three Speed Fan Slip Output...

Quantity:

PROMO Charger, 6/12V 70/60/2A, 265 Amp Cranking Assist, Wheels & AOE-6029
Code: AOE-6009

use by both UL and cUL. This fast starter has more features and higher ratings for the price than any competitive charger in its class. Commercial quality features make it a great buy. MODEL...

Quantity:

Charger, 6/12V 70/60A, Portable
Code: AOE-6010A

and maintenance-free batteries with four charging positions. Features: Five year limited warranty Automatic 90-minute timer with Hold position UL, cUL, and/or CSA listed for indoor...

Quantity:

Heavy Duty Portable Charging System Analyzer
Code: ATM-BVA34

to 1700 Amps with 1 Amp resolu Load Knob: Variable load with automatic load release Safety: Red “LOAD ON� LED light Timer: Start button with ON/OFF indicator light Fan: 5 in. Load...

Quantity:

2 Bank 12 Volt 10 Amp Battery Charger
Code: SOL-C10122S

to seasonal use or deep discharge during long storage periods. It features independent circuitry and charging controls for each of its two outputs. Features infinite charge rate adjustment from 0-10...

Quantity:

Hurri-Clean Pump-less Spray Gun Washer - Patented
Code: APT-4535

with auto stop timer Equipped with safety valve Auto shut-off lid switch Low air consumption 1 year warranty

Quantity:

Hurri-Clean Pump-less Waterborne Spray Gun Washer
Code: APT-4535W

disposed via drain valve Enclosed container operation minimizes painters' exposure to cleaning fluid Pre-assembled and ready to use Unit equipped with auto stop timer Equipped with safety...

Quantity:

ArcMaster 185 ACDC Stick/TIG Kit/Reg/Ft Ct, Stick/Lift-HF TIG
Code: VCT-10-3073A-1

capabilities for maximum user flexibility. Standard features include: High frequency start, lift TIG start, up/ down slope, pulse, repeat (latch) function, spot timer, job Save & Load, VRD...

Quantity:

4/20/40/70/300A 12V Microprocessor Control ProSeries Wheel Charger
Code: SHU-PSW-70300A

Automatic or Manual High Performance for 12V Battery Systems Over-sized heavy-duty selector switches Rotary output switch selects between: - 300 Amp engine start - 70 Amp rapid...

Quantity:

Cascade Automatic Double Spray Gun Cleaner
Code: URM-UG2000D

economy model saves time and money. Clean two sets of spray guns and cups automatically. Includes Timer, Stainless Steel Tank, Automatic Safety Lid Switch. This two gun model...

Quantity:

Dual Paint Gun Cleaner w/Vent and Pail Set
Code: URM-UG4000E

removes vapors when lid is raised Comes with pail set for connection to Uni-ram recycler Aluminum lid with safety switch Stainless steel tank Auto shutoff controls Built-in timer...

Quantity:

500 CFM Kuulaire, Portable Evaporative Unit
Code: PAC-PACKA70

KA70 Portable Evaporative Swamp Cooler. It creates the naturally occurring evaporation process. It also features a new modern appearance and can be easily adjusted with its manual switch...

Quantity:

15/30/70/300A 6/12/24V AL Boost Assist Wheel Charger
Code: SHU-PSW-7700

15/30/70/300A 6/12/24V AL Boost Assist Wheel Charger No. SHU-PSW-7700 15/30/70/300A 6/12/24V AL Boost Assist Wheel Charger 15/30/70/300A 6/12/24V AL Boost Assist Wheel Charger Features: Charge Rate...

Quantity:

2/35/200A 12V Manual Wheel Charger w/Engine Start
Code: SHU-SE-2352

35 amp rapid charge – charges in 1 to 1-1/2 hours. 2 amp trickle charge – charges a small 12 volt battery in 2 to 12 hours. Off position on switch. CUL Listed: Model SF-2001 has...

Quantity:

180/200A 6/12/18/24V Manual Wheel Charger w/Engine Start
Code: SHU-SE-3000

rotary switch – addresses all volt ranges. ""Hold"" position on timer switch – for continuous charging. CUL Listed: Model SF-3000 Specifications: Ranking Best Charger...

Quantity:

10/40/200A 6/12V Manual Wheel Charger w/Engine Start
Code: SHU-SE-4020

and accuracy. "Hold" position on timer switch – for continuous charging. UL Rating: 10 amp and 40 amp continuous, 200 amp start. Discharge Rating: 12/50 amp. Specifications:...

Quantity:

2/10/40/200A 6/12V Manual Wheel Charger
Code: SHU-SE-4022

hour. 10 amp fast charge – for everyday charging needs. Charges in 3 to 5 hours. 2 amp trickle charge – charges a small 12 volt battery in 2 to 12 hours. Multi-function tester. Two rotary...

Quantity:

FluidPRO DCS-1 Diesel Cleaning System
Code: RTI-410-80002-00

molded-in carrying handle & feet – keeps unit upright during fill Large fill cap/opening – spill proof fill Translucent, high-strength composite reservoir – visual fluid check Hanger loop -...

Quantity:

2/20/40/225A 6/12V Manual ProSeries Wheel Charger w/Engine Start
Code: SHU-PSW-22

Switch - 225A Engine Start (12V) - 125A Engine Start (6V) - 40A (12V & 6V) - 20A (12V) - 2A (12V ) Ammeter 2.25 Hour Timer Fiber Glass Clamp Rod Automatic Overload Reset & Short...

Quantity:

Thermal Arc 161STL Stick/TIG Kit w/Tool Box, Remote Control Capable
Code: VCT-W1003701

delivering superior arc starting and control when Stick welding. It also features improved control when DC Lift TIG welding: the 161 STL includes a trigger hold function (2T/4T), down slope...

Quantity:

ArcMaster 200 AC/DC Inverter TIG Welding System w/Clamp, Regulator
Code: VCT-10-3083A-2

features include: High frequency start, lift TIG start, up/ down slope, pulse, repeat (latch) function, spot timer, job Save & Load, VRD and cellulose E6010 compatibility. This is the...

Quantity:

ArcMaster 185 ACDC Stick/TIG Kit/Reg/Trch Ct, Stick/Lift-HF TIG
Code: VCT-10-3073A-2

voltage capabilities for maximum user flexibility. Standard features include: High frequency start, lift TIG start, up/ down slope, pulse, repeat (latch) function, spot timer, job Save &...

Quantity:

ArcMaster 185 ACDC Machine Only, Stick/Lift-HF TIG
Code: VCT-10-3073

Standard features include: High frequency start, lift TIG start, up/ down slope, pulse, repeat (latch) function, spot timer, job Save & Load, VRD and cellulose E6010 compatibility. This is...

Quantity: