Brake Tube Straightener

Related Searches:

Showing 1 - 24 of 141 Search Results for "brake tube straightener"

Items per page 12 | 24 | 48

1 2 3 of 6 next

Sort By:

PROMO MityVac Fluid Evacuator Plus 8.8L + MTY-MVA7205

PROMO MityVac Fluid Evacuator Plus 8.8L + MTY-MVA7205

Item #: MTY-MV7201

a large 8.8 Liter (2.3 gallon) capacity bi-functional manual unit, can be used to extract and dispense a wide-range of fluid types including: Engine oil from crankcases Brake fluid from master cylinders and most hydraulic brake systems Gear oil... from overfilling during use and automatically shuts off at 8 liters. The reservoir is constructed of durable polyethylene and will not rust or corrode. This kit comes with 5 ft. of flexible hose and two rigid dipstick tubes for engine oil or transmission fluid

PROMO Pressure Bleed System + 30.00 Gift Card

PROMO Pressure Bleed System + 30.00 Gift Card

Item #: MTY-MV6840

MV6840 Pressure Bleed System No. MTY-MV6840 MV6840 Pressure Bleed System MV6840 Pressure Bleed System The MV6840 is a professional hydraulic brake and clutch bleeding system that includes the Fluid Dispenser and seven (7) master cylinder adapters.... It forces new brake fluid down through the master cylinder, while air and old fluid are expelled through the bleed screw(s). A pressure gauge on the Dispenser allows control of the system pressure, and the pressurized reservoir allows the operator

PROMO Ball Joint Service Tool Kit + OTC-6297

PROMO Ball Joint Service Tool Kit + OTC-6297

Item #: OTC-7249

Features: Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins. Contains: 3 receiver tubes (2-3/4" I.D. x 3" O.D., 2-1/4" I.D. x 2-1/2" O.D., and 1-3/4" I.D. x 2" O.D.) Installation and removing adapters: 1... PC installing cup, 1 PC receiving cup, 1 PC installing adapter. Packaged In Blow molded carrying case Kit Includes: No. OTC-7248 – C-frame press. Jaw opens to 6.4". No. OTC-29503 – Receiver tube (3" O.D. x 2-3/4" I.D.). No. OTC-29504 – Receiver tube

PROMO Ball Joint Service Tool with 4-wheel Drive Adapters + APT-1600

PROMO Ball Joint Service Tool with 4-wheel Drive Adapters + APT-1600

Item #: APT-7865

of press-fit parts such as ball joints, universal joint and truck brake anchor pins It will remove even rusted and corroded parts Set contains C-frame press, 3 receiver tubes sizes: 2-3/4"x3", 2-1/4"x 2-1/2" & 1- 3/4"x2", installation and removing adapters Set

Tubing Straightener (1)

Tubing Straightener (1)

Item #: SRR-TS14316

Tube Straightener and Bending Pliers No. SRR-TS14316 Tube Straightener and Bending Pliers Tube Straightener and Bending Pliers Features: Straighten or bend tubing for a professional look Works with both 3/16in. and 1/4in. sizes

Brake Line and Tube Bending Pliers

Brake Line and Tube Bending Pliers

Item #: OTC-4401

OTC-4401 Tube Bending Pliers Features: Bends tubing from the side allowing for use in limited access areas 3/16in and 1/4in diameter tubing

Brake Tubing Reamer (1)

Brake Tubing Reamer (1)

Item #: SRR-RM69

SRR-RM69 Brake Tubing Reamer Prepare Tubing for Flaring in Seconds! Features: Deburr 3/16in , 1/4in, 5/16in & 3/8in tubing Advanced six-flute design produces smoother, cleaner tubing Works with Easy Bend alloy, steel, stainless steel,

Universal Brake Bleed Adapters

Universal Brake Bleed Adapters

Item #: MTY-MVA6913

Universal Brake Bleed Adapters No. MTY-MVA6913 4.5 oz Fluid Reservoir Kit 4.5 oz Fluid Reservoir Kit ityvac’s Universal Brake Bleed Adapter is specially designed to fit snuggly onto a wide range of brake and hydraulic clutch bleed screws. It forms... an airtight seal, and maintains a firm grip on the screw nipple. Includes: (2) Universal bleed screw adapters (2) Tapered bleed adapters Brass barbed adapter for connecting to 1/4in. (6.4 mm) ID tubing Specifications: Weight: 0.7 oz. (23 g)

Flaring and Tubing Master Tool Set

Flaring and Tubing Master Tool Set

Item #: ATD-5478

Master Flaring & Tubing Tool Set No. ATD-5478 Master Flaring & Tubing Tool Set Master Flaring & Tubing Tool Set Features: Includes cutting, bending & flaring tools designed for use on steel brake, transmission & fuel lines and copper, aluminum &... brass tubing Makes SAE 45-deg. double & single flares in 3/16in., 1/4in., 5/16in., 3/8in. & 1/2in. tubes Makes ISO bubble flares in 4.75mm, 6mm, 8mm & 10mm tubes found on many European, Asian & some domestic vehicles Roller style tubing bender makes

Mini Heavy Duty Tubing Cutter

Mini Heavy Duty Tubing Cutter

Item #: OTC-6514

Mini Tubing Cutter No. OTC-6514 Mini Tubing Cutter Mini Tubing Cutter Features: Works on tubing sizes 1/8in. to 5/8in. O.D. (3mm to 16mm). Easily cuts copper, brass, aluminum, and steel brake lines in hard-to-reach places. Ream folds onto cutter

Quick Draw Brake Bleeding System

Quick Draw Brake Bleeding System

Item #: KDT-3578

Brake Bleeding System No. KDT-3578 Brake Bleeding System Brake Bleeding System This brake bleeding system is great because it uses standard shop air. It has a locking trigger, universal bleeder nipple and a 16oz bottle. It is easy... to take apart and cleans up with soap and water. Features: Clear vacuum tube for fluid inspection 16 oz. bottle with fluid check valve Locking trigger Included a hang hook to free up hands Universal bleeder nipple

Drainman Tube Assembly

Drainman Tube Assembly

Item #: VAC-12-018-7055

Bleeder Hose Complete for DrainMan Brake Bleeders No. VAC-12-018-7055 Bleeder Hose Complete for DrainMan Brake Bleeders Bleeder Hose Complete for DrainMan Brake Bleeders Bleeder Hose Complete for Drainman Brake Bleeders (VAC-18-0079 or VAC-18-9989)

Brake Bleeder Wrench 5/16in. Hex Socket w/Drain Tube

Brake Bleeder Wrench 5/16in. Hex Socket w/Drain Tube

Item #: VIM-B455

Brake Bleeder Wrench 5/16in. Hex Socket w/Drain Tube No. VIM-B455 Brake Bleeder Wrench 5/16in. Hex Socket w/Drain Tube Brake Bleeder Wrench 5/16in. Hex Socket w/Drain Tube for GM ‘78 and Later Features: For 1978 and later GM Vehicles Lifetime

3/16in. Zinc Plated Brake Tubing 25ft. Roll

3/16in. Zinc Plated Brake Tubing 25ft. Roll

Item #: SRR-BRZ25

3/16in. Zinc Plated Brake Tubing – 25ft. Roll No. SRR-BRZ25 3/16in. Zinc Plated Brake Tubing – 25ft. Roll Durable Zinc Plated Line for Replacement & Custom Brake Line applications Features: Triple-annealed tubing for easier routing smoother... flaring More flexible and durable than standard steel brake line Zinc plated for improved anti-corrosion resistance 16,000 PSI burst pressure Double Walled with annealed seams

FHS-100 Brake Bleeder and Flusher

FHS-100 Brake Bleeder and Flusher

Item #: RTI-430-80004-00

with a quick turn of the control knob. Oil Extraction Tube for dipstick tube extraction Brake Fluid Bleeder for Brake Bleeding General Purpose Tube with Shut-off Valve and Semi-Rigid Flex End Rigid Tube attachment for filling of front or rear differentials,... FHS-100 Brake Bleeder & Flusher No. RTI-430-80004-00 FHS-100 Brake Bleeder & Flusher The FHS-100 provides the solution you need! Features: Unique feature allows choice of either filling or removing fluids. The change of operation is simple

Tubing Bender 4-in-1

Tubing Bender 4-in-1

Item #: ATD-5479

4-in-1 Tubing Bender No. ATD-5479 4-in-1 Tubing Bender 4-in-1 Tubing Bender Features: Bends 3/16in., 1/4in., 5/16in. and 3/8in. outside diameter brass, copper, steel or aluminum tubing Unique design allows bending in tight spaces Comfort grip

Heavy Duty Tubing Bender, 3-in-1, 180 degrees

Heavy Duty Tubing Bender, 3-in-1, 180 degrees

Item #: OTC-6515

Tubing Bender 3-in-1, 180 Degrees No. OTC-6515 Tubing Bender 3-in-1, 180 Degrees OTC Tubing Bender 3-in-1, 180 Degrees Features: Capable of making 180 degree bends in copper, brass, aluminum, and steel tubing Just one tool works on three sizes... of tubing: 1/4in., 5/16in., and 3/8in..

Brake-A-Sure, Brake Fluid Test Strips, 100 St

Brake-A-Sure, Brake Fluid Test Strips, 100 St

Item #: RTI-026-80354-00

Brake-A-Sure Brake Fluid Test Strips (100 Per Tube) No. RTI-026-80354-00 Brake-A-Sure Brake Fluid Test Strips (100 Per Tube) Brake-A-Sure Brake Fluid Test Strips (100 Per Tube) These handy test strips will help you sell more brake fluid flush... brake fluid flush should be recommended per UICS. Each test strip will test the virtual age of brake fluid. 100 test strips per tube. Features: Sell more brake fluid flush services Use the FASCAR rating system for a quick visual inspection Easily

OTC Master Brake Flaring Tool Kit

OTC Master Brake Flaring Tool Kit

Item #: OTC-6502

OTC Master Brake Flaring Tool Kit No. OTC-6502 OTC Master Brake Flaring Tool Kit OTC Master Brake Flaring Tool Kit Features: Covers all the capabilities of the following separate kits: Single Flare Standard Lines 3/16in. – 5/8in. Single Flare... Metric Lines 4mm – 14mm Double Flare Standard Lines 3/16in. – 1/2in. Double Flare Metric Lines 4mm – 10mm Bubble Flare Standard Lines 3/16in. – 1/2in. Bubble Flare Metric Lines 4.75mm – 10mm Kit Includes: Flaring bar, arbor press, adapters, tube cutter,

Fin Comb - Metal

Fin Comb - Metal

Item #: FJC-20709

Metal Fin Comb No. FJC-20709 Metal Fin Comb Straighten and clean condenser and evaporator fins.

3/16in Tubing Bender Pliers

3/16in Tubing Bender Pliers

Item #: LIS-44150

3/16in Tubing Bender Pliers No. LIS-44150 3/16in Tubing Bender Pliers Bends 3/16in Brake Lines Without Kinking or Flattening, Especially in Tight Spots. Features: Bends all types of 3/16in OD tubing. Unique head design bends tubing... without collapsing the tube. Won’t mark tube surface. The handles are more than 3-1/4in apart for proper leverage when handling even steel tubing.

Brake Line Tubing EZ Bend 3/16in 25ft SURandR

Brake Line Tubing EZ Bend 3/16in 25ft SURandR

Item #: SRR-BREZ100

E-Z BEND Brake Line Tubing 3/16in. (25ft. Roll) No. SRR-BREZ100 E-Z BEND Brake Line Tubing 3/16in. (25ft. Roll) E-Z BEND Brake Line Tubing 3/16in. (25ft. Roll) Features: Easy bending Simple routing No bending tools required Smooth flares create... better fitting seals Conforms to SAE specifications, pressure-rated up to 3,000 PSI Cuts labor by more than 50% High-performance alloy tubing won’t rust or corrode. Backed by LIFETIME WARRANTY!

Brake Line Tubing EZ Bend 3/16in 50ft SURandR

Brake Line Tubing EZ Bend 3/16in 50ft SURandR

Item #: SRR-BREZ100-50

E-Z BEND Brake Line Tubing 3/16in. (50ft. Roll) No. SRR-BREZ100-50 E-Z BEND Brake Line Tubing 3/16in. (50ft. Roll) E-Z BEND Brake Line Tubing 3/16in. (50ft. Roll) Features: Easy bending Simple routing No bending tools required Smooth flares create... better fitting seals Conforms to SAE specifications, pressure-rated up to 3,000 PSI Cuts labor by more than 50% High-performance alloy tubing won’t rust or corrode. Backed by LIFETIME WARRANTY!

Brake Line Tubing EZ Bend 3/16in 100ft SURandR

Brake Line Tubing EZ Bend 3/16in 100ft SURandR

Item #: SRR-BREZ100-100

E-Z BEND Brake Line Tubing 3/16in. (100ft. Roll) No. SRR-BREZ100-100 E-Z BEND Brake Line Tubing 3/16in. (100ft. Roll) E-Z BEND Brake Line Tubing 3/16in. (100ft. Roll) Features: Easy bending Simple routing No bending tools required Smooth flares... create better fitting seals Conforms to SAE specifications, pressure-rated up to 3,000 PSI Cuts labor by more than 50% High-performance alloy tubing won’t rust or corrode. Backed by LIFETIME WARRANTY!

1 2 3 of 6 next
SearchSpring