cylinder liner removal tool

Engine Cylinder Leakage Tester Kit OTC 5609
Code: OTC-5609

Cylinder Leakage Tester Kit No. OTC-5609 Cylinder Leakage Tester Kit Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit comes complete...

Quantity:

Broken Plug Remover For Ford 3V Triton Engine
Code: LIS-65600

Triton 3 valve per cylinder engines, (a common problem). The set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the...

Quantity:

Tool, Ford Crankshaft
Code: OTC-6024

are not free-wheeling, and if an engine has “jumped time,� it is possible the cylinder heads have to be removed because of damage to the valves or pistons Easily installs over...

Quantity:

Cylinder Liner Remover
Code: OTC-J-45876

Cylinder Liner Remover

Quantity:

Power Steering Pulley Puller/installer Set
Code: OTC-4530

Power Steering Pump Pulley Service Set No. OTC-4530 Power Steering Pump Pulley Service Set Power Steering Pump Pulley Service Set Features: A complete set of tools required to...

Quantity:

8pc. Fuel & Transmission Line Disconnect Tool Set
Code: APT-7892

fuel line found on GM, Ford or Chrysler cars Ford fuel line coupling tool provides easy, damage-free fuel line separation Works on 1990 and newer Ford Ranger and Explorers with 4.0L, 6...

Quantity:

Ford Injector Remover and Installer Kit
Code: OTC-6067

Ford Injector Remover/Installer Kit No. OTC-6067 Ford Injector Remover/Installer Kit Removes and installs injectors without damaging the injector or cylinder head....

Quantity:

Cylinder Liner Installer
Code: OTC-J-35597-A

Cylinder Liner Installer

Quantity:

Overhead Valve Spring Compressor Universal
Code: OTC-4573

Universal Overhead Valve Spring Compressor No. OTC-4573 Universal Overhead Valve Spring Compressor Universal Overhead Valve Spring Compressor Features : Permits removal and installation of...

Quantity:

Cylinder Liner Height Gauge with Hold-Down Bar
Code: OTC-7106

Cylinder Liner Height Gauge with Hold-Down Bar No. OTC-7106 Cylinder Liner Height Gauge with Hold-Down Bar Cylinder Liner Height Gauge with...

Quantity:

5in. Dia. Non-Vacuum Disc Pad, Vinyl-Face
Code: DYN-56106

vibration.Ideal for PSA-type disc adhesion. Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad. Quick disc removal.Made in the USA...

Quantity:

Ford F-150 Spark Plug Socket
Code: OTC-6900

Ford F-150 Spark Plug Socket No. OTC-6900 Ford F-150 Spark Plug Socket Easily fits down spark plug tube in cylinder head. Soft rubber insert holds and protects spark plug during...

Quantity:

Subaru Oil Filter Socket
Code: OTC-6905

Subaru Oil Filter Socket No. OTC-6905 Subaru Oil Filter Socket Application: Works on 2003–newer Subaru vehicles having the 2.5L 4- cylinder, turbo engine. Features: 66.5 mm, 14 flutes....

Quantity:

Glow Plug Removal Tool
Code: OTC-6005A

Diesel Glow Plug Removal Tool No. OTC-6005A OTC Diesel Glow Plug Removal Tool Diesel Glow Plug Removal Tool Removes damaged stuck-in...

Quantity:

6in. Dia. Non-Vacuum Disc Pad, Vinyl-Face
Code: DYN-56107

adhesion. Remove abrasive adhesive paper liner and press abrasive to vinyl-face sanding pad. Quick disc removal Made in the USA Specifications: 3/8in. (10 mm) Thickness...

Quantity:

Injector Puller GM
Code: OTC-J-46594

GM Injector Puller No. OTC-J-46594 GM Injector Puller GM Injector Puller Description: For General Motors. J-46594 is used to assist in removal of the injectors from the cylinder...

Quantity:

14-Bld Feeler Gauge Set for Valve Clearance Gapping
Code: KAS-1610

blades may contact the cylinder head and not provide the proper clearance "feel". 14-pc. set of 4" x 1/4" feeler gauge blades, thickness .002" through .015". Blades are stored in a bi-fold...

Quantity:

Manual Sleeve Puller Set
Code: OTC-1200

Manual Sleeve Puller No. OTC-1200 OTC Manual Sleeve Puller Manual Sleeve Puller Features: This manually operated, screw-powered device removes cylinder sleeves from most truck, bus,...

Quantity:

Ford F-150 Spark Plug & Compression Kit (Includes 5603, 5607, 6900)
Code: OTC-5607SP

and installation Extension is part of the socket. Easily fits down spark plug tube in cylinder head Socket has 3/8" drive for use with a ratchet or breaker bar Drive end of extension has...

Quantity:

Long Piston Stop Tool
Code: IPA-7877

when removing valve stem seals Once installed, it holds the crank shaft in place so shop air can be applied to a piston that is at top dead center Up to 100 lbs per square inch of...

Quantity:

Engine Cylinder Hone
Code: KDT-2833

Engine Cylinder Hone No. KDT-2833 Engine Cylinder Hone Engine Cylinder Hone Features: Hone and remove glaze from engine cylinders from 2in to 7in. (51 to...

Quantity:

Wet-Type Sleeve Puller (Only)
Code: OTC-1205

Universal Puller for Wet-Type Sleeves No. OTC-1205 Sleeve Puller with 5LB Slide Hammer Assembly This tool will remove cylinder sleeves faster than ordinary pullers because...

Quantity:

Engine Cylinder Ridge Reamer
Code: KDT-2389

Engine Cylinder Ridge Reamer No. KDT-2389 Engine Cylinder Ridge Reamer Engine Cylinder Ridge Reamer Features: Reamer removes ridges from top of engine...

Quantity:

Cylinder Leakage Tester
Code: ATD-5573A

Cylinder Leakage Tester No. ATD-5573A Cylinder Leakage Tester Cylinder Leakage Tester Features: New design incorporates a round, anodized body with permanent laser...

Quantity:

Spark Plug Sleeve Remover
Code: OTC-303-1203

Spark Plug Thread Remover No. OTC-303-1203 Spark Plug Thread Remover Features: Essential tool needed for the removal of spark plug threads that break off in the...

Quantity:

Valve Keeper Remover / Installer Kit Lisle
Code: LIS-36050

and reassembly fast and easy. Can be used on the car or bench. New smaller size works on Toyota four cylinder and Chrysler New World Engine applications. Magnet in tool body...

Quantity:

11 Piece Trim Tool Kit
Code: OTC-6642

11-Piece Trim Tool Kit No. OTC-6642 11-Piece Trim Tool Kit 11 specialty tools designed to remove trim strips, panels, wheel caps, bezels, liners, shrouds,...

Quantity:

Ford Clutch Coupling Remover Lisle
Code: LIS-11750

Clutch Hydraulic Coupling Remover For Ford No. LIS-11750 Clutch Hydraulic Coupling Remover For Ford Clutch Hydraulic Coupling Remover For Ford Features: Easily disengages...

Quantity:

Clutch Master Cylinder Pin Press Pliers
Code: KAS-475A

or the clutch slave cylinder on domestic vehicles with manual transmissions. Service the master cylinder and hydraulic lines without having to remove the whole assembly....

Quantity:

OTC Transmission Jack 2-Stage Hi-Lift Underhoist 1791
Code: OTC-1791

easier. Additional reach and spread are also provided. Foot pump and pedal release mechanism give precise ease of control when positioning or removing a transmission. Adjustable nylon...

Quantity: