Follow us on Google Plus! Follow us on YouTube!

Fluke 87

Showing 1 - 18 of 18 Search Results for "fluke 87"

Items per page 12 | 24 | 48

1 of 1

Sort By:

Industrial True Rms Multimeter w/Temp

Industrial True Rms Multimeter w/Temp

Item #:

Accuracy and diagnostic functions for maximum industrial productivity The new Fluke 87V (FLUKE-87-5) has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment. The new 80 series V are independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. Includes:TL75 test leadsAC72 Alligator ClipsHolster9V battery (installed)Getting Started ManualCD with detailed manual80BK temperature probeFeatures:Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasksLarge digit display with bright, two-level backlight makes the 80- Series V significantly easier to read than older models Made in USAFeature Comparison Chart 83-5 & 87-5 Feature 83V 87V True-rms ac voltage and current for accurate measurements on non linear signals   X Selectable filter for accurate voltage and frequency measurements on motor drives   X 0.05 % dc accuracy   X 6000 counts, 3-3/4 digits X X 4-1/2 digit mode for precise measurements (20,000 counts)   X Measure up to 1000 V ac and dc X X Measure up to 10 A, 20 A for up to 30 seconds X X Built in thermometer lets you carry one less tool (TC probe included)   X Frequency to 200 kHz and % duty cycle X X Resistance, continuity and diode test X X 10,000 μF capacitance range for components and motor caps X X Min/Max-Average recording with Min/Max Alert to capture variations automatically X X Peak capture to record transients as fast as 250 μs X X Relative mode to remove test lead interference from low ohms measurements X X Auto and manual ranging for maximum flexibility X X Touch Hold to capture stable readings avoiding noisy signals X X Large display digits and two-level bright white backlight for increased visibility X X Analog bargraph for fast changing or unstable signals X X Input Alert provides audible warning against wrong use of input jacks X X Improved selectable sleep mode for long battery life X X Access door for fast battery changes without breaking the calibration seal X X "Classic" design with new removable holster with built in test lead and probe storage X X Lifetime warranty X X Specifications:

Processmeter (Dmm / Loop Calibrator in One)

Processmeter (Dmm / Loop Calibrator in One)

Item #:

The Fluke 787 ProcessMeter™ combines a DMM and a Loop Calibrator in one rugged, handheld tool. Features: DMM and loop calibrator in one toolClear LCD with backlight; 4,000 counts (30,000 counts for dc current)Externally accessible battery for easy battery changes.1000V overload protection on V, ohms, frequency. 150V overload protection on mA, backed up by 440 mA 1000V fuse.25% Manual Step plus Auto Step and Auto Ramp on mA output.Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency0.1% dc voltage accuracy0.05% dc current accuracy, 1 ‘A resolution to 30 mASimultaneous mA and % of scale readoutTrue rms ac voltage measurement to 1 kHzFrequency measurement to 20 kHzMin/Max/Average/TouchHold/Relative modesDiode test and continuity beeper20 mA current source/simulatorSimultaneous mA and % of scale readoutManual step (25%, coarse, fine) plus auto step and auto ramp Processmeter includes: AC70A Alligator ClipsC81Y Protective Yellow Holster with Flex-Stand™One 9V alkaline batteryQuick Reference GuideTL75 Safety-Designed Test lead SetUsers Manual Specifications: Current Measurement Range: 0-1 A Resolution: 1 mA Accuracy: 0.2% + 2 LSD Range: 0-30 mA Resolution: 0.001 mA Accuracy: 0.05% + 2 LSD Current Sourcing Range: 0 to 20 mA or 4 to 20 mA Resolution: 0.05% of span Drive Capability: 500 Ω @ 24 mA Frequency to 19.999 kHz, 0.005% + 1 LSD Continuity Beeps for resistance < 100 ΩVoltage measurement Range: 0-1000 V AC (true-rms) or DC Resolution: 0.1 mV to 1.0 V Accuracy: 0.1% Rdg + 1 LSD (VDC) Resistance measurement to 40 MΩ, 0.2% + 1 LSDDiode test 2.0 V shows diode voltage drop Display current and % of span YesAuto step, auto ramp Yes Environmental Specifications: Operating Temperature -20ºC to 55ºC Storage Temperature -40ºC to 60ºCHumidity (Without Condensation) 95% up to 30 ºC 75% up to 40 ºC 45% up to 50 ºC 35% up to 55 ºC Temperature Coefficient 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC) Safety Specifications: Electrical Safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01- 1994 and CAN/CSA C22.2 No. 1010.1-92 Overvoltage category IEC 1010-1 CAT III Maximum Voltage 1000 V rms Mechanical & General Specifications: Size 32 x 87 x 187 mm Shock and Vibration Random, 2 g, 5-500 Hz 1 meter drop testBattery Type Single 9V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61) Warranty 3 Years Battery Life 50 hours typical (measurement), 12 hours typical (sourcing 12 mA)

Rtd Calibrator

Rtd Calibrator

Item #:

The Fluke 712 RTD Process Calibrator delivers outstanding performance, durability and reliability. Features: Measure temperature from TC output Simulate TC output Operable with nine types of thermocouples Calibrate linear TC transmitter with mV source function Selectable ºF or ºC Thermocouple mini-jack terminationProtective holster features test lead storageCompatible with toolpack magnetic hanging systemCompact, lightweight, and easy to carry Easy-to-use push button interfaceEMI tolerantDust and splash resistantRemovable battery door for quick battery changes.Instructions Sheet (14 languages) RTD Calibrator includes: Protective Yellow Holster with test lead storage Instructions Sheet (14 languages)Single 9V alkaline batteryTest Leads and Alligator ClipsNIST-traceable calibration report and data Functional Specifications: Measure / simulate RTD Range: 0 Ω to 3200 Ω Resolution: 0.1 Ω Accuracy: 0.025% +.01 to 0.55% Specifications: Display Clear 5 digit LCD Environmental Specifications: Operating Temperature -10ºC to 55ºC Storage Temperature -40ºC to 60ºCHumidity (Without Condensation) 95% (10 ºC to 30 ºC) 75% (30 ºC to 40 ºC) 45% (40 ºC to 50 ºC) 35% (50 ºC to 55 ºC) Operating Altitude 3,000m max Safety Specifications: Safety CSA C22.2 No. 1010.1:1992 Mechanical & General Specifications: Size 187 mm L x 87mm W x 32 mm (7.93 in. L x 3.86 in. W x 2.06 in D) Weight Approx. 330 g (21 oz)Warranty 3 Years Shock and Vibration Random, 2G, 5-500 Hz, 1m drop testBattery Type Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline

Pneumatic Test Pump. -13 to 600psi

Pneumatic Test Pump. -13 to 600psi

Item #:

The Fluke-700PTP-1 pneumatic test pump is capable of supplying pressures up to 600 psi, 40 bar. For use with 700 series pressure modules or test gauges. Can be directly connected to the reference port consolidating two separate pieces when performing pressure calibration and testing. Can also be used with 717 pressure calibrators. Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 600 PSI/40 bar.    Features:Pump can be easily cleaned without disassemblyThe vernier can be used as a stand-alone low pressure calibration sourceTwo pressure ports allowing simultaneous connection:1/4 -NPT female fitting for the reference gauge or pressure module1/4” NPT female fitting for the unit under testAdjustable stroke length can be set to limit the pressure per stroke  Mechanical & General Specifications:Size   length 8.7 in (220 mm), width 4.8 in (122 mm), depth 3.5 in (89 mm)  Weight    1.03 lb (467 g) Warranty   One year Material   Wetted materials: aluminum, silicon, neoprene, stainless steel, Buna-N Includes:1/4 in NPT male to 1/4 in BSP female1 meter of hose(2) 1/8 in NPT male quick connects 1/8 NPT female to 1/4 in BSP femaleSeal KitInstruction sheet

Industrial Multimeter 1000V

Industrial Multimeter 1000V

Item #:

The Fluke 83-5 offers accuracy and diagnostics for industrial maintenance in the tool box or on the bench. The new Fluke 83V (FLUKE-83-5) has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment. Includes:TL75 test leadsAC72 Alligator ClipsHolster9V battery (installed)Getting Started ManualCD with detailed manualFeatures:Analog BargraphAuto (Touch) HoldAuto Power OffAuto RangingBacklightCapacitanceConductanceContinuityCounts 6000Counts 6000 CountsCurrent AC AC Amps: 10Current DC DC Amps: 10Dangerous Voltage IndicatorDiode TestDisplay Hold Duty CycleFrequency 200Input AlertLow Battery IndicatorLow Input ImpedanceManual RangingMicro Amps Min/Max Min/Max/AvgMin/Max/AvgRelative Mode / ZeroResistance 50Voltage AC AC Volts: 1000Voltage DC DC Volts: 1000 Made in USA Limited Lifetime Warranty Feature Comparison Chart 83-5 & 87-5 Feature 83V 87V True-rms ac voltage and current for accurate measurements on non linear signals   X Selectable filter for accurate voltage and frequency measurements on motor drives   X 0.05 % dc accuracy   X 6000 counts, 3-3/4 digits X X 4-1/2 digit mode for precise measurements (20,000 counts)   X Measure up to 1000 V ac and dc X X Measure up to 10 A, 20 A for up to 30 seconds X X Built in thermometer lets you carry one less tool (TC probe included)   X Frequency to 200 kHz and % duty cycle X X Resistance, continuity and diode test X X 10,000 μF capacitance range for components and motor caps X X Min/Max-Average recording with Min/Max Alert to capture variations automatically X X Peak capture to record transients as fast as 250 μs X X Relative mode to remove test lead interference from low ohms measurements X X Auto and manual ranging for maximum flexibility X X Touch Hold to capture stable readings avoiding noisy signals X X Large display digits and two-level bright white backlight for increased visibility X X Analog bargraph for fast changing or unstable signals X X Input Alert provides audible warning against wrong use of input jacks X X Improved selectable sleep mode for long battery life X X Access door for fast battery changes without breaking the calibration seal X X "Classic" design with new removable holster with built in test lead and probe storage X X Lifetime warranty X X Specifications:

440MA Replacement Fuse For Fluke Meters 5 Pack

440MA Replacement Fuse For Fluke Meters 5 Pack

Item #:

• 440mA fuse for the following meters 45 (s/n >7211001), 863, 865, 867, 867B, 83, 85, 87 (s/n > 65650001), 87-IV, 89-IV, 187, 189, 83-III, 85-III, 87-III, 87E-III, 23-III, 77-III, 26-III, 79-III, 175, 177, and 179.

Lot Qty 5 ,Fuse, Fiber, 15A 600V,Fast,Lot Qty - Caution!

Lot Qty 5 ,Fuse, Fiber, 15A 600V,Fast,Lot Qty - Caution!

Item #:

For use with older Fluke® Model numbers 83,85 and 87 with serial numbers below 65650000. 5 pack.

AC Current Clamp

AC Current Clamp

Item #:

Extends Current Capability Of A DMM To 800 A AC The model i800 is a clamp-on AC current probe designed to extend the current measuring capability of a digital multimeter to 800 amperes AC. The clamp is compatible with a DMM that accepts 4mm shrouded banana plugs and has an AC milliamp range.    Features:Measures AC current from 100mA to 800 A rms30 Hz to 10 kHz frequency rangeCAT III 600 V ratingAccepts up to 54 mm (2.1 in) diameter conductor size1000:1 conversion factor for easy calculationRugged positive action design Specifications:Nominal current range   800 A rmsContinuous current range   100 mA to 800 A rmsMaximum Non-Destrucive Current   1500 A rms (50/60 Hz)Lowest measurable current   100 mABasic accuracy   ±1% of readingUseable frequency   30 Hz - 10 kHz (-3dB)Output level(s)   1 mA / AWeight : .85 kg (1.87 lb) Dimensions (L x W x H) : 11.8 x 26.67 x 7.6 cm (4.6 x 10.5 x 3 in)     Safety Specifications:Safety   CAT III 600 VMaximum voltage   600 V ac rms or dc Mechanical & General Specifications:Warranty   1 yearMaximum conductor diameter   54 mm (2.13 inches)Output cable length   1.6 m (63 inches)Lead connector   Shrouded banana plugs

Fluke Insulation Multimeter (Telecom) – 50V, 100V Test Voltages

Fluke Insulation Multimeter (Telecom) – 50V, 100V Test Voltages

Item #:

Fluke Insulation Multimeter (Telecom) – 50V, 100V Test VoltagesThe Fluke 1587 T Telecom Insulation Multimeter combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit with 50 Volt and 100 Volt outputs  Features:FLUKE 1587 T INSULATION MULTIMETER Insulation test 0.01 MΩ to 2 GΩ Insulation test voltages 50 V and 100 V Insulation test smoothing reading Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection Auto-discharge of capacitive voltage for added user protection Low-pass filter for motor drive measurements AC/DC voltage, dc milliVolts, ac/dc milliamps, resistance (Ω), and continuity Capacitance, diode test, temperature, Min/Max, and frequency (Hz) Auto power off to save battery power * Large display with backlight and large digits Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work Rugged, utility hard case allows you to bring everything you need for the job K-type thermocouple CAT III 100V, CAT IV 600V measurement category Three-year warranty

True-rms Electronics Logging Multimeter w/TrendCapture

True-rms Electronics Logging Multimeter w/TrendCapture

Item #:

True-rms Electronics Logging Multimeter w/TrendCapture As promised, we continue to add capabilities to the 289 multimeter. Version 1.1 upgrade includes a variety of new features including a zooming ability to view and analyze TrendCapture data at five (5) times magnification. The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its’ unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 packs more accuracy and convenience into a handheld multimeter than ever before, putting more problem solving power in your hands. It is the ultimate handheld tool for demanding applications that require high-precision. All models include: Supplemental Material: Manual6 AA Batteries, installedTL71 Silicone Test LeadsProbe HolderTwo AC72 Alligator Clips   Registration CardCal Practices DocumentCD-ROM Users' Manual (16 languages)Getting Started ManualStatement of Calibration Practices Document   Features:New with V 1.1 Upgrade! Zoom on trend provide unprecedented ability to view analyze TrendCapture data; see detail at X5 magnification.New with V 1.1 Upgrade! Simplified Record screen when setting up recordingNew with V 1.1 Upgrade! Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.Large 50,000 count, ¼ VGA display with white backlight. Multiple sets of measurement information can simultaneously be displayed at the same time.Logging function with TrendCapture is an essential tool for documenting the performance of your designs, processes or systems, or unattended monitoring while you work on other projects. It plots measurements as a single line to help detect signal anomalies over time. Using on-board TrendCapture, you can graphically view logged readings without a PC. (Software and interface cable optional).Log multiple sessions or log data continuously for over 200 hours.i-info button. On board help screens for measurement functions. Unsure about a function? Go to that function and Press the “i” button.Now, name your saved measurements and also recall measurements made in the fieldReal Time Clock – for automatic time stamping of saved readingsField upgradeable and expandable meter lets you stay current as new capabilities are addedMulti-lingual interfaceMin/Max/Average with Time Stamp to record signal fluctuations Soft keys, scroll buttons and easy navigation control access to secondary functions.0.025% Basic DC accuracy100 kHz ac bandwidthTrue-rms ac voltage and current for accurate measurements on complex signals or non-linear loads.Measure up to 10A (20 A for 30 seconds; 10A continuous)100 mF capacitance rangeTemperature functionRelative mode to remove test lead resistance from low ohms or capacitance measurementsPeak capture to record transients as fast as 250 μsPremium test leads and alligator clips includedOptional FlukeView forms enables you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documentsOptional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.Limited lifetime warranty CAT III 1000 V / CAT IV 600 V safety rated Made in USA Specifications:

True-rms Electronics Logging Multimeter w/TrendCapture, View Forms

True-rms Electronics Logging Multimeter w/TrendCapture, View Forms

Item #:

">0.025% Basic DC accuracy100 kHz ac bandwidthTrue-rms ac voltage and current for accurate measurements on complex signals or non-linear loads.Measure up to 10A (20 A for 30 seconds; 10A continuous)100 mF capacitance rangeTemperature functionRelative mode to remove test lead resistance from low ohms or capacitance measurementsPeak capture to record transients as fast as 250 μsPremium test leads and alligator clips includedOptional FlukeView forms enables you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documentsOptional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.Limited lifetime warranty CAT III 1000 V / CAT IV 600 V safety rated Made in USA Multimeter Specifications:

Fluke 1587/MDT Advanced Motor and Drive Troubleshooting Kit

Fluke 1587/MDT Advanced Motor and Drive Troubleshooting Kit

Item #:

Fluke 1587/MDT Advanced Motor & Drive Troubleshooting Kit The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications. Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment and can significantly reduce both planned and unplanned downtime. Unplanned downtime costs are difficult to calculate, but often significant. For some industries, it can represent 1 % - 3 % of revenue (potentially 30 % - 40 % of profits) annually.  Features:Includes a Fluke 1587 Insulation Multimeter, Fluke i400 Current Clamp, and a Fluke 9040 Phase Rotation Indicator.With the Fluke 1587, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease. Use the Fluke i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit Check the rotation of three-phase motors easily and safely with the Fluke 9040 Fluke 1587 Insulation Multimeter –Two products in one: Powerful Insulation Tester and Full-featured Multimeter Ideal for work on motors, cables, and switch gear Large display with backlight Filter for motor drive measurements Insulation test (0.01MΩ to 2GΩ) Insulation test voltages (50 V, 100 V, 250 V, 500 V, 1000 V) for many applications CAT III 1000 V /CAT IV 600 V overvoltage rating for added user protection 3 year warranty Fluke i400 Current Clamp – Use with your Fluke 1587 to measure 1A AC to 400 A AC 1 mA/Amp output guarantees easy reading CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection Specially designed to offer maximum utility in a very compact shape Maximum conductor: Ø 32 mm 1 year warranty Fluke 9040 Phase Rotation Indicator –Large display to easily determine field rotation and phase sequence Indication for all three phases CAT III 600 V overvoltage rating 2 year warranty  

Fluke 1587/ET Advanced Electrical Troubleshooting Kit

Fluke 1587/ET Advanced Electrical Troubleshooting Kit

Item #:

Fluke 1587/ET Advanced Electrical Troubleshooting Kit The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications. Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment and can significantly reduce both planned and unplanned downtime. Unplanned downtime costs are difficult to calculate, but often significant. For some industries, it can represent 1 % - 3 % of revenue (potentially 30 % - 40 % of profits) annually.  Features:Includes a Fluke 1587 Insulation Multimeter, Fluke i400 Current Clamp, and a Fluke 62 Mini Infrared Thermometer.With the Fluke 1587, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease. Use the Fluke i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit Check for hot spots and measure temperature with the Fluke 62 Mini non-contact thermometer. Fluke 1587 Insulation Multimeter –Two products in one: Powerful Insulation Tester and Full-featured Multimeter Ideal for work on motors, cables, and switch gear Large display with backlight Filter for motor drive measurements Insulation test (0.01MΩ to 2GΩ) Insulation test voltages (50 V, 100 V, 250 V, 500 V, 1000 V) for many applications CAT III 1000 V /CAT IV 600 V overvoltage rating for added user protection 3 year warranty Fluke i400 Current Clamp – Use with your Fluke 1587 to measure 1A AC to 400 A AC 1 mA/Amp output guarantees easy reading CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection Specially designed to offer maximum utility in a very compact shape Maximum conductor: Ø 32 mm 1 year warranty Fluke 62 Mini IR Thermometer –Quick and reliable surface temperature readings (non-contact) Best accuracy in its class : + 1 % of reading or +1 °C (+2 °F) Wide temperature range: -30° to 500 °C (–20 ° to 932 °F) Dual displays shows current and max measurements simultaneously Holds temperature readings for 7 seconds 2 year warranty, conditional

Yellow Molded Carrying Case (For Fluke 27, 83, 87, 88)

Yellow Molded Carrying Case (For Fluke 27, 83, 87, 88)

Item #:

Yellow Molded Carrying Case (For Fluke 27, 83, 87, 88)Rugged hard case with durable vinyl cover which doubles as a tilt stand. Holds meters in transit with right angle test leads connected. Meter can be used while in case. Large internal compartments hold current clamps, test leads and other accessories; slip pocket holds quick reference card.Features:High visibility yellow with gray cover Designed for 83, 87 or 88 meters with holsters and the Fluke 27

87V/E2 Industrial Combo Kit

87V/E2 Industrial Combo Kit

Item #:

• Kit contents: • 87V Industrial Multimeter • C35 Lightweight soft case to provide optimal protection and accessory storage • TL224 1.5 m silicone leads resist heat • TP238 Removable probes with 4mm of exposed metal for use on industrial circuits • AC220 Retractable long reach alligator clips • ToolPak Magnetic hanger to position and hold meter to steel surfaces • 80BK K-type temperature probe

1 of 1
SearchSpring