hydraulic c clamp

10 Ton Hydraulic Gear Puller
Code: SUN-3909

10-Ton Capacity Hydraulic Gear Puller Set No. SUN-3909 10-Ton Capacity Hydraulic Gear Puller Set Sunex Tools® Specialty Tools – Clever Tools for All Occasions. Make complicated...

Quantity:

1-Ton Capacity Hydraulic Spreader w/ Coupler
Code: OTC-4085

1-Ton Capacity Hydraulic Spreader w/ Coupler No. OTC-4085 1-Ton Capacity Hydraulic Spreader w/ Coupler 1-Ton Capacity Hydraulic Spreader w/ Coupler Features: This...

Quantity:

S/W PCMCIA Meritor Hydraulic Brakes (Graphiq)
Code: MPI-804025

Meritor Wabco ABS – Hydraulic Application Card No. MPI-804025 Meritor Wabco ABS – Hydraulic Application Card Application Card For The MPC, Pro-Link Plus And Pro-Link GRAPHIQ...

Quantity:

WABCO Suite for IQ
Code: MPI-888014

contains all of the features and functions available with this application. Systems Covered: Meritor WABCO D and E series pneumatic (air) tractor ABS Meritor WABCO D and E series hydraulic...

Quantity:

Start-All, Hydraulic, 1000-amp, 12/24V Hydraulic Powered
Code: GDL-11-811

full-power jaw clamps Hydraulic requirements: 25 GPM @ 2500 psi with 3/4in. pressure hose and 1in. return hose / 5 micron filter Dimensions: 48in.L x 20in.W x 12in.H Weight: 400...

Quantity:

Electric/Hydraulic Pump 4-Way Valve
Code: OTC-4033

Then at approximately 200 PSI, the high-pressure, low-volume stage takes over to handle high force requirements. These pumps are ideal for hundreds of hydraulic applications such as...

Quantity:

Start-All, Hydraulic 700-amp, 12 volt only
Code: GDL-11-802

battery LED indicators confirm proper connections Volt and amp meter to monitor boosting output 24/12 volt selector switch for easy operation 30 ft., 1/0 ga. welding cable allows convenient access...

Quantity:

1/2-Ton Hydraulic Spreader w/1/4in Ram Half Coupler
Code: OTC-9101A

1/2-Ton Hydraulic Spreader w/1/4� NPT Ram Half Coupler No. OTC-9101A 1/2-Ton Hydraulic Spreader w/1/4� NPT Ram Half Coupler 1/2-Ton Hydraulic Spreader w/1/4� NPT...

Quantity:

Hydraulic Powered Start All 12/24Volt 600AMP
Code: GDL-11-807

Hydraulic Powered Start All 12/24Volt 600AMP No. GDL-11-807 Hydraulic Powered Start All 12/24Volt 600AMP Start All Features: 24 volt nominal, 350 amp cranking capacity 12 volt...

Quantity:

Clamp-on Auto-refill Kit
Code: MTY-MVA6832

Clamp-on Auto-refill Kit No. MTY-MVA6832 Clamp-on Auto-refill Kit Clamp-on Auto-refill Kit MVA6832 uses gravity to automatically refill the master cylinder during vacuum or...

Quantity:

Power Press Plate, 6-Ton Capacity
Code: MCL-6356

Power Press Plate, 6-Ton Capacity No. MCL-6356 Power Press Plate, 6-Ton Capacity Power Press Plate, 6-Ton Capacity Features: A unique tool to fully utilize the capabilities of your portable...

Quantity:

Mini-Tower, 4-Ton Capacity
Code: MCL-8009

Mini-Tower, 4-Ton Capacity No. MCL-8009 Mini-Tower, 4-Ton Capacity Mini-Tower, 4-Ton Capacity Features: This kit includes everything but the chain and hydraulics. Fast, simple setup for...

Quantity:

MityVac Vacuum Brake Bleeder with Auto Refill Kt
Code: MTY-MV6835

Vacuum Brake Bleeder w/Auto Refill Kit No. MTY-MV6835 Vacuum Brake Bleeder w/Auto Refill Kit Vacuum Brake Bleeder w/Auto Refill Kit Model MV6835 extends the capabilities of our MV6830 vacuum brake...

Quantity:

Multi-Pad Metal, 6-Ton Capacity
Code: MCL-6355

that would otherwise be caused by the chain. Two bolts prevent the chain from sliding off as well as for attaching hydraulic pushing plates. Made of super tough polyurethane that shapes...

Quantity:

Basic Hendrickson Set
Code: OTC-1740

51695 Jack cart OTC- 206457 Press adapter OTC- 206459 Clamp plate OTC- 303839 Hydraulic hose OTC- 302018 Spacer (2) OTC- 302019 Receiving adapter OTC- 302021 Receiving adapter OTC-...

Quantity:

Hendrickson Press Tooling Set
Code: OTC-1764

Center and End Bushing Tool Set for Hendrickson Series No. OTC-1764 Center and End Bushing Tool Set for Hendrickson Series For use with a 100-ton or larger hydraulic press. Features: This...

Quantity:

Ball Joint Remove/Install Set
Code: ASM-BMW202

the receiver tube during ball joint installation. Features: Combines the AST #BMW 200 A and the AST #BMW 201 This 5-Piece Kit Allows for Quick Removal and Replacement of Ball Joints Works with...

Quantity:

Pump Electronic Vanguard Jr. 3Way Valve
Code: OTC-4031

high force requirements. These pumps are ideal for hundreds of hydraulic applications such as clamping, bending, straightening, pressing, forming, testing, pushing, and pulling....

Quantity:

Truck Tire Changer (208V, 3 phase)
Code: COR-HD1200ECL

operation. Mobile control unit separate from the machine. Hydraulic power pack separate from the machine. Wheel clamping with two-speed bi-directional hydraulic turntable....

Quantity:

Rivet Guns Blind Fasteners Huck HK229
Code: HUK-229

SureSet 229 Pneudraulic Rivet Gun No. HUK-229 SureSet 229 Pneudraulic Rivet Gun SureSet 229 Pneudraulic Rivet Gun Designed to install Grip-Rite and Auto-Clamp SureSet Rivets, as well as...

Quantity:

Master Auto-refill Kit
Code: MTY-MVA6836

Master Auto-refill Kit No. MTY-MVA6836 Master Auto-refill Kit Master Auto-refill Kit Whether you’re vacuum or manually bleeding/flushing a hydraulic brake or clutch system, if the master...

Quantity:

Heavy Duty Tire Changer - up to 90.5in. Diameter Tires
Code: CTS-CHD-9043

with both a variety of applications and large wheel fitments. Features: Solid, single-piece frame for added capacity and dependability Remote controlled, hydraulically operated tool arm...

Quantity:

Truck Tire Changer for Tube and Tubeless Tires, 110V/1P
Code: CTS-HIT5000

from 15in. to 38in. Features: Easy-to-use swing-arm houses all hydraulic controls, with a dedicated lever for each powered function. Self-centering hydraulic clamping...

Quantity:

Heavy Duty Truck Tire Changer 220V/3P
Code: CTS-HIT9000

from 15in. to 44in. Features: Easy-to-use swing-arm houses all hydraulic controls, with a dedicated lever for each powered function. Self-centering hydraulic clamping...

Quantity:

Heavy Duty Tire Changer, 90.5in Max Tire Dia. 42in. Max Width
Code: CTS-CHD-9041

Specifications 208-230VAC, 3ph, 60Hz, 15Amp Hydraulic Motor Power 2.0 HP (1.5 kW) Chuck Rotation Motor Power 1.7-2.4 HP (1.3-1.8 kW) Max. Chuck Torque 5262 ft/lbs (3881 Nm)...

Quantity:

Heavy Duty Tire Changer, 95in Max Tire Dia. 51in. Max Width
Code: CTS-CHD-9551

Hydraulic Motor Power 2.9 HP (2.2 kW) Chuck Rotation Motor Power 3.2-4.4 HP (2.4-3.3 kW) Max. Chuck Torque 7017 ft/lbs(5175 Nm) Clamping Power 10,802 lbs (4900 kg) Chuck Rotation...

Quantity:

Heavy Duty Tire Changer, 63in Max Tire Dia. 30.5in. Max Width
Code: CTS-CHD-6330

Hydraulic Motor Power 2.0 HP (1.5 kW) Chuck Rotation Motor Power 1.5-2 HP (1.1-1.5 kW) Max. Chuck Torque 4816 ft/lbs (3552 Nm) Clamping Power 7407 lbs (3360 kg) Chuck Rotation...

Quantity:

Heavy Duty Tire Changer
Code: CTS-CHD-4730

and 30.5in. wide Specifications: Max. Tire Diameter: 47in. (1200 mm) Max. Tire Width: 30.5in. (780 mm) Rim Diamter Range: 14in. - 26in. Electric Specifications: 208-230 VAC, 3 ph, 60 Hz, 12 Amp...

Quantity:

Pump Electric Vanguard Jr. 4-Way Valve
Code: OTC-4036

approach and return. Then at approximately 200 PSI, the high-pressure, low-volume stage takes over to handle high force requirements. These pumps are ideal for hundreds of hydraulic...

Quantity:

GPC5000 Start-All, 700amp, 12/24 Volt; Welder, 240 amp; Generator 5000W; Air Compressor 23cfm
Code: GDL-05-000

nominal, 700 amp 24 volt nominal, 400 amp 30 ft., 1/0 ga. welding cable allows for flexibility and ease of use 1000 amp clamps allow maximum amperage output Control Panel Control panel...

Quantity: