Follow us on Google Plus! Follow us on YouTube!

Kit Pro Link 9000 Diagnostic Data Reader

Showing 1 - 13 of 13 Search Results for "kit pro link 9000 diagnostic data reader"

Items per page 12 | 24 | 48

1 of 1

Sort By:

Item #:

Pro-Link iQ™ Meritor WABCO Suite No. MPI-888014 Pro-Link iQ™ Meritor WABCO Suite The Meritor WABCO application software provides the technician with functions necessary to service the tractor and trailer ABS brake systems. The following list contains all of the features and functions available with this application. Systems Covered: Meritor WABCO D and E series pneumatic (air) tractor ABS Meritor WABCO D and E series hydraulic ABS Meritor WABCO Easy-Stop and Enhanced Easy-Stop trailer ABS* *PLC testing requires NEXIQ PLC Converter Kit (MPI- 601020) sold separately Features: Diagnostic data list PLC test application Read and clear fault codes Component tests Vehicle voltages ABS valves ATC valves ABS/ATC lamps Sensors Engine data link Retarder relay Retarder data link System setup POWER LINE CARRIER (PLC) TEST APPLICATION* FOR TRAILER ABS Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU’s to communicate with the tractor ECU via the J560 power line to activate the warning lamp. Test tractor and trailer coupled or trailer independently for MID messages. *PLC testing requires NEXIQ PLC Converter Kit (PN 601020) sold separately Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation. Verify trailer ABS ECU for MID 10 and MID 11 messages. TRACTOR PNEUMATIC ABS "D" AND "E" DIAGNOSTIC SUPPORT ABS trailer lamp (PLC) ABS valves ABS/ATC lamps ATC valves Component tests Engine data link Read and clear fault codes Retarder data link Retarder relay Sensors System information System setup Tire calibration Vehicle voltages TRAILER - EASY STOP AND ENHANCE EASY STOP ABS valves Component tests Program ID Read and clear fault codes Sensors Service info (V300 Series) System setup Tire calibration (V300 Series) Trailer voltages HYDRAULIC ABS "D" AND "E" DIAGNOSTIC SUPPORT Access ECU program ID information including: ECU type Part number Manufacturer's date Serial Number Software version View text descriptions of active and stored fault codes Clear fault codes Display data list parameters including: Individual wheel sensor speeds and voltages ABS switch status Pump relay voltage Battery voltage Retarder relay voltage Channel project number Lamp output voltage Safety project number ABS warning lamp status Channel version number ABS brake control status Safety version number ABS retarder control status Test functions include: Activate/Actuate individual modulator inlets and outlets Pump relay, retarder relay and valve relay Clamp control circuit Turn ABS warning lamp On/Off Reset retarder relay status

Item #:

• Provides flexibility to provide diagnosis of engine and vehicle systems through the useof PC MCIA application cards (sold separately) • Works with vehicle protocols J1587, J1708, J1939, 160 baud • Easy application updates via RS232 port • Custom data list • Snapshot feature • Printer support • The Multi-Protocol Cartridge (MPC) is an Intel-based Pro-Link Plus compatible cartridge designed to diagnose today's J1708, J1939, 160 Baud, ISO 9141 vehicles. It provides anew platform that greatly enhances the flexibility of the Pro-Link Plus, and extends the life of this most versatile tool. To address advanced capabilities provided by manufacturers, the MPC uses PC MCIA cards. The cards are plugged into the back of the unit, and provide additional functions unique to each manufacturer. The following list contains features and functions that are available with this cartridge.

Item #:

PRO Series CarScan - CarReader OBD2 Code Reader No. INN-30203 PRO Series CarScan - CarReader OBD2 Code Reader CarScan Series– BUILT for PROFESSIONALS, by  PROFESSIONALS   Click HERE for Model Comparison Chart   UNIQUE FEATURES: Supports Hybrid & New Diesels Vehicle Health Status LED’s – Quickly confirm if a vehicle will pass an emissions test Emissions Readiness Advisor – Quickly complete OBD trip and drive cycles One Year Warranty Features: Perfect entry-level tech tool ideal entry-level tech tool where nothing more than basic diagnostic and repair verification information is needed. Work on all 1996 and newer cars, light trucks, SUVs and minivans – Domestic and Import including the newest OBD2 compliant diesel and hybrid vehicles. All-in-one backlit display that shows over 20 pcs of vital diagnostic information at any one time. Plug and play functionality with simple to use ‘hot keys’ for intuitive navigation. Links to all OBD2 protocols including C.A.N. to decode “Check Engine” light problems. Automatic refresh updates data every 30 seconds when connected to the vehicle – an easy way to verify repair completion Features unique patented all-in-one backlit screen display and 3 color LED display for quick State Emissions readiness check Comes with 15 inspection maintenance monitor coverage which is a great way to verify repairs have been completed and the vehicle has run through its complete drive cycle. Shows generic(P0, P2, P3, and U0) manufacturer specific(P1, P3, and U1), global, pending and permanent codes as well as the code which caused the freeze frame data to be set. Comes with a full one year warranty. A dedicated all ASE bi-lingual toll free technical support line Mon-Sat, 6am – 6pm, PST.

Item #:

Genisys Super Bundle Domestic & Asian 2006 Kit No. OTC-3421-90 Genisys Super Bundle Domestic & Asian 2006 Kit Purchase This Genisys Software Kit and Receive a $100 Cash Card! Limited Time Only USA 2006 Domestic Software with Pathfinder New Expanded Systems Coverage and Special Tests Ford bi-directional special tests. New vehicles, systems and approximately 200 NEW special tests are added for earlier year vehicles as well as 2006 models. Domestic 2006 provides coverage back to 1980 with focus on vehicles technicians see in their shops everyday. NEW Mode 6 Summary Screen sorts all failed Mode 6 tests to the top for easy identification. New Code Library Fast access to OBD II Generic and OEM Enhanced DTC’s from the Repair Information Menu. Pathfinder Troubleshooting Code Information available from Code Library. New USB Drive Expanded Recording Read the extended recordings on Genisys or the PC. Data recordings without a USB drive are extended to 1000 frames! USA 2006 Domestic Software with Pathfinder includes three powerful repair information databases! Pathfinder Troubleshooting Information Pathfinder troubleshooting information from 1992 to 2004 provides critical information at the technician’s fingertips. In addition to the Repair-Trac and Fast Fixes™ databases, repair information includes: Code information Data/sensor information PCM connector information Component location Specifications Symptoms TSB references Fast Fixes™ Repair Information Database Fast Fixes is a “sister” information database to Repair-Trac. No pattern failure listed for the vehicle’s symptom? No problem, Fast Fixes data provides a vehicle-specific checklist of the most likely and most overlooked causes. Systems covered: Engine performance Steering HVAC Brakes Charging Starting Suspension Repair-Trac™ Tech Tips Repair-Trac is the largest database of known vehicle-specific fixes available to the automotive aftermarket. Why settle for some other scan tool that offers limited repair information, or none at all? Only the NGIS scan tool has the diagnostic power and the largest repair database to help you work smarter. Check it out: Coverage from 1969 through 2004 for USA domestic, USA Asian, and USA European vehicles Aftermarket TSBs based on information from over 2 million tech service calls. Access Repair-Trac from the Main Menu, Data Stream, or Trouble Code menus. Quickly identify vehicle-specific pattern failures. Automated System Test Now Available with USA 2006 Domestic Software Applications Features: With one button press, Automated System Test™ performs a system “health check” of all available vehicle controllers. Any trouble codes found are reported along with other vital scan data. Repair-Trac pattern failures and available repair information are linked to trouble codes of the top known component failures. USA 2006 Asian Software with Pathfinder This kit is for NGIS scan tool owners who already have the Asian Import 2003 or 2005 starter kits and want to update software coverage to 2006. Kit Includes: NGIS software CD Manual Smart Card USA 2006 Asian Software—Now with Honda OEM Coverage. Covers OBD I and OBD II thru 2006. Powerful Asian Import diagnostics coverage. Asian also includes Pathfinder troubleshooting! The 2006 release now also integrates Repair-Trac™ tech tips and Fast Fixes™ into Asian software. NEW FEATURES: Over 500 bi-directional special tests added to Asian 2006 software. NEW! Honda licensed OEM data coverage includes engine, transmission, ABS, air bag, tire pressure monitor, and more body and chassis systems. Enhanced engine and transmission data stream and read codes for Nissan (1990–2006 DDL1 & DDL2 protocols), Mitsubishi and Mazda (1996–2006), and Toyota (through 2006). ABS and air bag support for Nissan, Mitsubishi (1996–2006), and Toyota (includes keyword protocols for 1998–2006). Expanded Toyota OBD I, 1995 and older coverage OBD II Smart Cable Compatible USB drive expanded recording. The user can now expand the data recording time by using the USB drive. When complete, the recordings can be uploaded to the FREE ConnecTech Reader software via the USB drive directly to the PC. NEW! read the extended recordings on Genisys OR the PC. NEW! data recordings without a USB drive are extended to 1000 frames! Enhanced data graphs. Data monitor graphs now include an average reading for spotting data trends quickly. Fast diagnosis of O2 sensor lean and rich trends is an example. Automated System Test for USA 2006 Asian Software With one button press, Automated System Test performs a system “health check” of all available vehicle controllers. Any trouble codes found are reported along with other vital scan data. Repair-Trac™ pattern failures and available repair information are linked to trouble codes of the top known component failures. New Pathfinder Troubleshooting Features Coverage to 2005 Access to Repair-Trac (all years available) Access to Fast Fixes (all years available) Vehicle Information (critical specifications & parameters for many systems) Torque Specifications Oil Light Reset Procedures The new OBD II Smart Cable has the combined power of over 50 System Smart Inserts! Eliminates the need for many current and future System Smart Inserts. Provides improved test capability and accuracy, resulting in faster diagnosis for higher technician productivity. Definition: System Smart Inserts (SSI’s) are used to “mux” or route connector data lines as necessary to facilitate OEM enhanced communication and can sometimes contain electronics. SSI’s provide access to this OEM enhanced information in place of additional cables. What was once the best low cost solution is now re-invented with the Genisys OBD II Smart Cable. OBD II Smart Cable is designed to work with any of the following applications: USA 2006 Domestic, USA 2006 Asian, USA 2005 European, and Heavy-Duty Standard software. Genisys OBD II Smart Cable Features/Changes: Current OBD II SSI cable goes away. Over 50 SSI’s go away! No new SSI’s in the various Genisys Kits – many were planned! Sophisticated electronic circuitry in the new OBD II Smart Cable replaces current and future line switching System Smart Inserts Bottom Line Benefits: Improved technician satisfaction Improved test capability Faster diagnosis, more convenient Higher technician productivity

Item #:

">Repair-Trac is the largest database of known vehicle-specific fixes available to the automotive aftermarket. Why settle for some other scan tool that offers limited repair information, or none at all? Only the NGIS scan tool has the diagnostic power and the largest repair database to help you work smarter. Check it out:Coverage from 1969 through 2004 for USA domestic, USA Asian, and USA European vehiclesAftermarket TSBs based on information from over 2 million tech service calls. Access Repair-Trac from the Main Menu, Data Stream, or Trouble Code menus. Quickly identify vehicle-specific pattern failures. Automated System TestNow Available with USA 2006 Domestic Software ApplicationsFeatures:With one button press, Automated System Test™ performs a system “health check” of all available vehicle controllers. Any trouble codes found are reported along with other vital scan data. Repair-Trac pattern failures and available repair information are linked to trouble codes of the top known component failures.System 2.0 Starter Kit NEW System 2.0 software Hi speed compact flash “Super Card” NGIS CD Card reader Compact flash cover for your tool Powerful Features: Fast Boot – New and improved Genisys boots up in about 30 seconds; Genisys Classic takes twice as long. New User Interface – Provide Genisys with a new improved icon based user interface. (Think MS DOS to Windows XP.) Code Reader Mode – Users may want to just read or clear codes fast. Now Genisys can boot into a code reader mode FAST – approximately 5 - 7 seconds! Personalization – A custom setup mode for user preferences.User configurable Function Keys – user selected applications @ one button Interface Selection – New System 2.0 icon-based or Genisys Classic menu IMPORTANT: System 2.0 software is included. Other applications will require a Smart Card to authorize. Many software applications are preloaded for convenience only and will not function without the appropriate Smart Card to authorize use. Smart Cards are only obtained by purchasing the appropriate software kit. System 2.0 is required to install USA 2006 Domestic with Pathfinder, USA 2006 Asian with Pathfinder, USA 2005 European with Pathfinder, Heavy-Duty Standard and InfoTech 2006. Preloaded applications for your convenience include:System 2.0 Domestic 2006 Domestic 2005 Pathfinder 2004 Pathfinder 2003 Asian 2006 Asian 2005 Asian 2003 European 2005 European 2003 InfoTech 2006 InfoTech 2005 Heavy Duty Standard InfoTech Scope Gas M/P Software ABS / Air Bag 2004 ABS / Air Bag 2002 Global OBD IIThe memory card prompts the user for new applications they may want to install (requires Smart Card) and then automatically updates the other authorized software on a scan tool.  USA 2006 Asian Software with PathfinderThis kit is for NGIS scan tool owners who already have the Asian Import 2003 or 2005 starter kits and want to update software coverage to 2006.Kit Includes: NGIS software CDManual Smart Card USA 2006 Asian Software—Now with Honda OEM Coverage. Covers OBD I and OBD II thru 2006.Powerful Asian Import diagnostics coverage. Asian also includes Pathfinder troubleshooting! The 2006 release now also integrates Repair-Trac™ tech tips and Fast Fixes™ into Asian software.NEW FEATURES:Over 500 bi-directional special tests added to Asian 2006 software. NEW! Honda licensed OEM data coverage includes engine, transmission, ABS, air bag, tire pressure monitor, and more body and chassis systems. Enhanced engine and transmission data stream and read codes for Nissan (1990–2006 DDL1 & DDL2 protocols), Mitsubishi and Mazda (1996–2006), and Toyota (through 2006).ABS and air bag support for Nissan, Mitsubishi (1996–2006), and Toyota (includes keyword protocols for 1998–2006). Expanded Toyota OBD I, 1995 and older coverage OBD II Smart Cable CompatibleUSB drive expanded recording. The user can now expand the data recording time by using the USB drive. When complete, the recordings can be uploaded to the FREE ConnecTech Reader software via the USB drive directly to the PC. NEW! read the extended recordings on Genisys OR the PC. NEW! data recordings without a USB drive are extended to 1000 frames! Enhanced data graphs. Data monitor graphs now include an average reading for spotting data trends quickly. Fast diagnosis of O2 sensor lean and rich trends is an example.Automated System Test for USA 2006 Asian SoftwareWith one button press, Automated System Test performs a system “health check” of all available vehicle controllers.Any trouble codes found are reported along with other vital scan data. Repair-Trac™ pattern failures and available repair information are linked to trouble codes of the top known component failures.New Pathfinder Troubleshooting FeaturesCoverage to 2005 Access to Repair-Trac (all years available) Access to Fast Fixes (all years available)Vehicle Information (critical specifications & parameters for many systems) Torque Specifications Oil Light Reset Procedures The new OBD II Smart Cable has the combined power of over 50 System Smart Inserts!Eliminates the need for many current and future System Smart Inserts. Provides improved test capability and accuracy, resulting in faster diagnosis for higher technician productivity. Definition: System Smart Inserts (SSI’s) are used to “mux” or route connector data lines as necessary to facilitate OEM enhanced communication and can sometimes contain electronics. SSI’s provide access to this OEM enhanced information in place of additional cables. What was once the best low cost solution is now re-invented with the Genisys OBD II Smart Cable. OBD II Smart Cable is designed to work with any of the following applications: USA 2006 Domestic, USA 2006 Asian, USA 2005 European, and Heavy-Duty Standard software. Genisys OBD II Smart CableFeatures/Changes:Current OBD II SSI cable goes away. Over 50 SSI’s go away! No new SSI’s in the various Genisys Kits – many were planned!Sophisticated electronic circuitry in the new OBD II Smart Cable replaces current and future line switching System Smart InsertsBottom Line Benefits:Improved technician satisfaction Improved test capability Faster diagnosis, more convenient Higher technician productivity

Item #:

OE-level scan tool diagnostics in the palm of your hand!  The MTS 3100 is the tool that revolutionized the repair industry, combining comprehensive OE-level scan diagnostics, automotive scope & meter functions in one handheld package. When your business depends on maximum productivity, don’t settle for anything less. The original multifunction tester the MTS 3100 Mastertech is 3 Tools in 1 providing ScanTest digital meter & automotive oscilloscope functions. 100% OBD II compliant including the new Controller Area Network (CAN) protocols.   High Capacity Mass Storage Cartridge Reprogrammable application cartridge contains application software updated through a PC. Custom Graphics Display - High visibility backlit LCD screen displays up to 16 PIDs, including custom list, LED, bar graph & line graph modes. Logical Keypad - 23-key hydrocarbonresistant membrane keypad for easy, logical tester navigation. Program Card - Reprogrammable PCMCIA card contains application software updated through a PC. RS232 Serial Port - Connects to a PC enabling Shop Foreman Pro, SPS & application software downloads. Vehicle Serial Data Link - Connects to vehicle DLC, & supports OBDI, OBDII & CAN protocols. Instrumentation Port - Connects additional instrumentation such as meter, scope, & battery tester. Features:Comprehensive vehicle software coverage from model year 1981 to currentCovers powertrain, chassis & body systemsDealer-level coverage including General Motors, Toyota/Lexus & Honda/AcuraPatented bi-directional control testingFully OBDII compliant including Controller Area Network (CAN) protocolsSupports GM & Toyota/Lexus controller reprogramming Includes:This kit includes software & hardware necessary to diagnose 1981-current Domestic & Asian vehicle proprietary on-board diagnostic systems.Includes 1 year of GM/Ford/Chrysler updates (Powertrain, chassis & body), the Asian Pro Series software (non-subscription) & the CAN VIM. Note: 12MB Program Cards are included in this kit.  Software Highlights for MFT 7.1 Domestic:Multimeter Functions Available in Data List - Meter functionality has been added to the SnapList functionality. While viewing a SnapList, the F6 key will turn on/off the meter function, utilizing the measurement signal from the DLS or EDLS lead set. The meter function will appear as the first data item in the list. Available modes are Volts, Duty Cycle, Frequency, P/W (H/L), and current. If you highlight the meter parameter, the Yes/No keys will change the item. Ford Module Status - Ford Module Status has added UBP (UART-Based Protocol) and MSCAN (Medium Speed). *CAN VIM 2.0 required.Ford Powertrain - The Ford 4x4 ECU was added for MY 2002-later vehicles. It can be accessed through the Powertrain Selection. Most MY 2006 Ford vehicles are in the database. General Motors Powertrain & Body - MY 2005 GM Powertrain Output Controls have been updated and expanded. MY 2000-2005 GM HVAC Data & Output Controls MY 2000-2005 GM BCM Data & Output Controls Chrysler Powertrain - Cummins Diesel support has been added to the new database, including Output control tests. Model year support is 1999-2007, and covers all three series of the 5.9L as well as the new 6.7L for 2007. You will still need the F-00K-104-795 adapter for the MY 99-2002 vehicles. You can access a 1998 by identifying it as a 1999 in the vehicle selection screen. Software Highlights for MFT 7.3 Ford:2000 – 2004 Ford Powertrain -  Model years 2000-2004 (Non-CAN) PCM systems added to new database, including Read/Clear DTCs, SnapLists and Output Controls. Selections also allow custom user list. Output Controls like the OE tool!. 2000 – 2004 ABS/TCS - 2000-2004 ABS/TCS systems, including SnapList and Output controls 2000 – 2004 Body Systems - Updated EATC, RCM, PATS and more Body modules added, including Output Controls CAN VIM 2.0 Controller Area Network Vehicle Interface ModuleVehicle technology is changing and the Mastertech is keeping up. The new CAN VIM 2.0 enables the MTS-3100 Mastertech to communicate with 26 additional networked ECU’s found on today’s Ford vehicles. These ECU’s are divided into 2 types of networks; UBP – UART Based Protocol; MSCAN – Medium Speed CAN Note: CAN VIM 2.0 is utilized with Mastertech software release version 7.1 and later.   New ECU’s Added!Ford UBP Modules Drivers Seat Module Vehicle Security Module Electronic Auto Temp Control Generic Electronic Module 4X4 Control Module Rear Air Suspension Module Passenger Climate Seat Module Driver Climate Seat Module Parking Aid Module Liftgate / Trunk Module Ford MSCAN Modules Instrument Cluster Vehicle Dynamics Module Ford MSCAN Modules (cont’d) Generic Electronic Module Audio Control Module Electronic Auto Temp Control Parking Aid Module Drivers Door Module Driver Front Seat Module Vehicle Security Module Power Running Board Rear Seat Entertainment Module Audio Rear Control Unit Liftgate / Trunk Module Driver Climate-Control Seat Module Satellite Digital Audio Receiver System Digital Signal Processing Module  Mastertech Vehicle Protocol Specifications Global OBD II (CARB) J1850VPW, J1850PWM, ISO9141-2, ISO14230-2, ISO15765-4 General Motors GM UART, GM Class 2, KWP2000, GMLAN, SW CAN Ford DCL, SCP, ISO9141, HSCAN, MSCAN, UBP (New) Chrysler SCI, CCD, J1850, CAN Toyota KW71, KW81, KW82, MOBD, CAN Honda H92, H95, H99 Nissan DDL1, DDL2  Software Highlights For MFT 7.2 Nissan Multimeter Functions Available in Data List - Meter functionality has been added to the SnapList functionality. While viewing a SnapList, the F6 key will turn on/off the meter function, utilizing the measurement signal from the DLS or EDLS lead set. The meter function will appear as the first data item in the list. Available modes are Volts, Duty Cycle, Frequency, P/W (H/L), and current. If you highlight the meter parameter, the Yes/No keys will change the item. Module Status Added - Nissan DDL2 and CAN were added to Module Status function. Up to 26 ECUs can be accessed. Nissan Coverage - Model year coverage has been expanded to 2007, including DDL2 and CAN ECUs, Auto ID now available on ECUs that support Mode $09. Idle Learn - Idle Air Volume Learn and EGR position tests added to ECM controls. ABS Systems - ABS Systems have SnapLists and Output Controls added.Software Highlights For MFT 7.2 NissanBody Control Systems - New BCM ECU coverage, including Output controls. HVAC, IPDM and more Body modules added, including Output Controls Software Highlights For MFT 6.2 HondaMultimeter Functions Available in Data List - Meter functionality has been added to the SnapList functionality. While viewing a SnapList, the F6 key will turn on/off the meter function, utilizing the measurement signal from the DLS or EDLS lead set. The meter function will appear as the first data item in the list. Available modes are Volts, Duty Cycle, Frequency, P/W (H/L), and current. If you highlight the meter parameter, the Yes/No keys will change the item. Auto ID - The Auto ID feature will work on a few MY04s and most MY05s. This is a function of the ECU implementation of Mode $09 VIN reporting. Manual entry is also available. DTC Retrieval -  There is a new Honda SnapList called DTC Status which reports the status of individual DTC tests. Please be advised that not all DTCs report in this mode, and this a function of the ECU, not the tool. We report exactly what the OEM tool does. Data List - The User List allows selection of custom parameters from the entire list. Output Controls - The ECU will report all tests, but may not support them all. If the ECU does not support the test it will report a message of NOT SUPPORTED. This is identical to the OEM tool behavior Note: MY04 Acura RL, Honda Odyssey/Pilot AT controls use a unique communication and are not implemented in this release. They can be accessed through the OE software in Limited Mode.

Item #:

A Revolutionary Diagnostics Package! Get going with the Bosch Mastertech VCI Trio! The scan tool, laptop and router allin-one package! Pre-installed software! No special set up or  programming required,  making vehicle diagnosis fast and easy!   VCI Trio Package Includes:Mastertech VCI Scan Tool Kit Laptop PC with 11.6in. high resolution viewing screen Wireless router, configured for immediate use Pre-installed Domestic & Asian software on the laptop Pre-installed Shop Foreman Pro Diagnostic Record Management software on the laptop Simple pictorial Quick Start Guide 1 Year Software  Subscription Included!VCI Essential Features:Award-winning scan test software covering model years 1996 to current Fully OBD II compliant, including Controller Area Network (CAN) protocols Support for powertrain, chassis and body systems Industry-standard wireless hardware J-2534 compliant for OE ECU reprogramming* Designed for new MVCI vehicle software designs utilizing D-PDU API*General Motors, Ford, Toyota (now), other OEM makes in 2009  More VCI Features:OEM Technology: Leading edge platform for future vehicle communication designs.Simple Vehicle Interface: Utilizes industry-standard SAE J-1962 16-pin connector Trio w/no special “keysin. or adapters required for OBD II vehicles.PC Connectivity:  Operates Trio w/a Windows PC through either wireless, Ethernet or USB connection. Graphical User Interface: Award-winning Shop Foreman Pro user interface is accessible via a desktop, laptop or tablet PC. User-Defined Controls: Custom keypad controls to optimize tablet, laptop or keyboard operation. Flash Memory Updates: Internet-based vehicle software applications and tester firmware.  What Makes the Mastertech VCI Different? PC architecture High performance processor D-PDU and J2534 compliant Data logging Allows for multiple communication links Secure access to vehicle networks Industry standard wireless communication Introduced in OEM dealerships

Item #:

Meritor Wabco ABS – Hydraulic Application Card No. MPI-804025 Meritor Wabco ABS – Hydraulic Application Card Application Card For The MPC, Pro-Link Plus And Pro-Link GRAPHIQ Benefits: Simplifies ABS diagnosis by putting the data you need in the palm of your hand Quickly access comprehensive OEM proprietary data and test functions Display fault codes, data values and actuate ABS devices Take anywhere and begin diagnosing in seconds Easy menu navigation to get the information you need quickly Reduces diagnostic time and potential vehicle down time Snapshot data recording and playback identifies drive-ability and intermittent problems Ensures confidence that brakes are safe and operational Features: Access ECU program ID information including: ECU type Part number Manufacturer’s date Serial number Software revision View text descriptions of active and stored fault codes Clear fault codes Display data list parameters including: Individual wheel sensor speeds and voltages ABS switch status Pump relay voltage Battery voltage Retarder relay voltage Channel project number Lamp output voltage Safety project number ABS warning lamp status Channel version number ABS brake control status Safety version number ABS retarder control status Test functions include: Activate/Actuate individual modulator inlets and outlets Pump relay, retarder relay and valve relay Clamp control circuit Turn ABS warning lamp On/Off Reset retarder relay status Kit Includes: Application card and Manual

Item #:

Meritor WABCO ABS Software For Pro-Link GRAPHIQ No. MPI-801014 Meritor WABCO ABS Software For Pro-Link GRAPHIQ Meritor WABCO ABS Software For Pro-Link GRAPHIQ Application card designed to work with ProLink GRAPHIQ to provide coverage for Meritor WABCO non-D, D and E Tractor ABS, Easy-Stop and Enhanced Easy-Stop trailer ABS. The Meritor WABCO application software provides the technician with functions necessary to service the tractor and trailer ABS brake systems. To address advanced capabilities provided by Meritor WABCO, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Meritor WABCO. The following list contains all of the features and functions available with this card. Features: Diagnostic data list PLC test application Read and clear fault codes Component tests Vehicle voltages ABS valves ATC valves ABS/ATC lamps Sensors Engine data link Retarder relay Retarder data link System setup Trailer – Easy Stop & Enhance Easy Stop PLC test application Read and clear fault codes Program ID Component tests Trailer voltages ABS valves Sensors System setup Service info (V300 Series) Tire calibration (V300 Series) Tractor ABS "D" And "E" PLC test application Read and clear fault codes Component tests Vehicle voltages ABS valves ATC valves ABS/ATC lamps ABS trailer lamp (PLC) Sensors Engine data link Retarder relay Retarder data link System setup System info Tire calibration Power Line Carrier (Plc) Test Application1 For Trailer ABS Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU’s to communicate with the tractor ECU via the J560 power line to activate the warning lamp. NEXIQ’s PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy to use and provides the ability to: Verify trailer ABS ECU for MID 10 and MID 11 messages. Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation. Test tractor and trailer coupled or trailer independently for MID messages. (Requires NEXIQ PLC Converter Kit PN 601020)

Item #:

DDEC Mercedes Benz 900/4000 for ProLink No. MPI-804031 DDEC Mercedes Benz 900/4000 for ProLink Application Card For The MPC, Pro-Link Plus And Pro-Link GRAPHIQ The Detroit Diesel MBE application software provides the capability to diagnose and change selected parameters on Detroit Diesel MBE 900 and 4000 electronic systems. To address advanced capabilities provided by Detroit Diesel, the MBE diagnostic application is stored on a PCMCIA card for use with the Pro-Link scan tool’s Multi Protocol Cartridge (MPC). The card inserts into the MPC, and provides functions unique to the Mercedes Benz Engine systems. Simple menus allow technicians to easily navigate through a variety of diagnostic functions. It provides access to a full range of comprehensive OEM proprietary data and tests for maintaining top vehicle performance and keeping it on the road. The following list contains many of the features and functions available with this card. This release supports VCU software through version 12.XX and PLC software through version 6.0. Kit Includes: Application Card and Manual Features: View MBE Data List Temperatures Pressures Switch Status Basic Trip & Life to Date Data Diagnostic Codes Read Active Codes Read Inactive Codes Clear Inactive Codes View Configuration Parameters Starter Lockout RQV (Torque Limit) ABS/ATC Type Fan Configuration PTO Function Accelerator Pedal Input Configuration Fleet Management Change Basic Parameter Settings Idle/PTO Shutdown Engine Protection Engine Brake Cruise Control Limiters Fast Idle Service Diagnostic Routines Sensor Voltages Cylinder Cut Off Compression Test Standard Pro-Link Features Create Snapshots Complete Pro-Link Printer Support Choose between Metric and English Units All New MBE Application Updated Functions More Diagnostic Codes Expanded Programmable Parameters New Injector Classification Code Support Additional Password Level Support Parameter Graphing when used with Pro-Link GRAPHIQ

Item #:

Detroit Diesel III & IV GRAPHIQ PCMCIA Card No. MPI-805015 Detroit Diesel III & IV GRAPHIQ PCMCIA Card The Detroit Diesel Suite 8.3 Application Software provides the user the capability of reprogramming and diagnosing Detroit Diesel DDEC III and IV electronic systems with the latest controller software level of R39. To address advanced capabilities provided by Detroit Diesel, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Detroit Diesel. The following list contains all of the features and functions available with this card. Kit includes Application Card and Manual. New Features Include: Covers diagnostics for DDEC III/IV ECM firmware to version R39 “Reset Particulate Trap” Function, allows for resetting of mileage on particulate trap change-out New PID/SID’s for: Particulate Trap, EGR System Monitoring, O2 Sensor Counts, Smart Cruise Control Status and Expanded System Diagnostics Monitoring New PRO-LINK GRAPHIQ support for graphical display of EGR and other “OBD” monitored tests Fault code date and time logging 2nd page fault data supported for active faults ECM date and time display Progressive shift parameters Additional Features: Data list parameters Trouble codes with text descriptions Perform diagnostic tests Speed limit parameters Exhaust temperature monitoring English/Metric menu saves setting to PCMCIA card Snapshot recording Create custom data list DDEC III Engine Features: Displays the specific DDEC system type, including DDEC IV Increased half engine operation functionality Support of low gear torque limiting Supports cutout for natural gas engines Additional ESS transmission functionality Added total engine revolutions to the engine data menu Eaton Top 2 support added Support for optimized load Reset AFR learn table on naturalgas engines New maintenance monitoring Monitor systems Perform diagnostic test Modify system/data DDEC Marine Application Features: Supports marine controls version 2.0, 2.5, 3.0 Separated menus for marine controls specific parameters Marine engine parameters integrated with standard engine parameters Menu option allows for parameter names to switch from standard to marine Data list enhancements Series 638 Features: Print option added Data list Defect codes View codes Clear codes I/O status Operating System Enhancements Custom data list can be saved to PCMCIA Data list wrap Includes data freeze feature Snapshot trigger on any fault Faster and easier print function Side button 2 hot key Historic codes, print 2nd page data Print all ECM data Print 2nd screen data inactive faults More descriptive headings Application version number included Tool ID display enlarged Marine menu data list enhancements  

Item #:

International Navistar NAVPAC Graphiq PCMCIA Card No. MPI-804010 International Navistar NAVPAC Graphiq PCMCIA Card Application card designed to work with ProLink GRAPHIQ provide coverage for International electronic engine systems. Key Features: Displays diagnostic codes in Navistar or ATA format Programmed with simple menus to easily navigate technicians through a variety of diagnostic functions Perform diagnostic tests: Injector test Output state tests VSS tests Tachometer buffer test Wiggle wire test The service reprogramming function allows you to use the Pro- Link Plus to download information from the vehicle's ECM, send it by modem to Navistar and load the new command file into the vehicle's ECM View or reprogram selected operating parameters Snapshot modes for recording data triggered by any key, any trouble code, specific trouble code, specific SID or specific PID for capturing intermittent problems Displays parameter description and values in English or metric format Communications transfer function allows you to connect the Pro-Link Plus to a personal computer Printer output allows you to print data list, diagnostic codes, calibration data, service parameters or Snapshot data Data Display Features Rated horsepower Rated RPM Active codes/inactive codes Engine hours Miles Fuel usage Battery volts Engine oil temperature Ambient air Coolant level andtemperature Accelerator Engine RPM Boost PSI Barometric PSI Torque limit Engine load Injector control PSI Fuel gallons/hour Transmission shaft RPM Two speed axle Vehicle speed MPH Idle set RPM Maximum speed MPH MPH limit Cruise control information Engine oil PSI PTO information Remote variable PTO Remote APS Retarder inhibit VPM information ECM version and checksum Reprogram These Parameters: Configuration options Start inhibit mode Retarder mode Exhaust back pressure Glow plug Cruise control Engine warning Engine/transmission selections Event engine hours Fuel, hours, miles shutdown Idle shutdown Overtemp protection Passwords and audits PTO control Road speed limiting Torque tailoring Speed calibration VIN and engine serial number VPM revision data Kit Includes:   Application card, Manual  

Item #:

DANA/EATON Roadranger w/PLC No. MPI-804001 DANA/EATON Roadranger w/PLC Application Card For The MPC, Pro-Link Plus And Pro-Link GRAPHIQ. Key Features: EATON Autoshift/Autoselect Gen 1 Display and clear active intermittent fault codes Monitor AutoShift/AutoSelect system data Displays: Transmission make Model Serial number System application System configuration Transmission application Transmission configuration Kit Includes: Application Card and Manual Systems Covered: Eaton AutoShift/AutoSelect GEN 1 Eaton ABS -Anti-lock brake system Dana TMS - Tire management system Eaton VORAD CWS Eaton Top 2 Ceemat transmission Power Line Carrier (PLC) Test application for trailer ABS PCMCIA The Roadranger application software provides coverage for Roadranger products including Eaton ABS and electronic transmissions, the VORAD collision warning system, and Dana Tire Management Systems. To address advanced capabilities provided by the Roadranger products the MPC uses a PCMCIA card. The card is plugged into the back of the unit and provides additional information unique to Dana/Eaton products. EATON ABS – Anti-Lock Brake System Covers truck/tractor and trailer systems Functions   Generation 5 ABS w/PLC Generation 4 ABS Generation 3 Gamma ABS View system information View and clear fault codes Monitor system inputs Test system components Reset system configuration DANA TMS - TIRE MANAGEMENT SYSTEM All tire management systems covered in one application! CTIS - Mobility systems PCS - Mobility systems Read service codes Monitor systems Tire monitor system Tire maintenance system Displays vehicle data Perform diagnostic tests Modify system/data EATON VORAD CWS Display and clear active and intermittent fault codes Perform system diagnostics Perform system tests EATON TOP 2 Display and clear active and historical fault codes Test Top 2 solenoids Shift solenoid Lockout solenoid CEEMAT TRANSMISSION Displays transmission make, model, serial number, shift counts Display and clear active and intermittent fault codes Perform tests on vehicle interface, shift lever, throttle dip test, engine brake, air system and hydraulic system Monitor CEEMAT system data Need to update your existing Dana Eaton Roadranger card? Dana Eaton Roadranger ABS PCMCIA card floppy disk update PN 802001F Power Line Carrier (PLC) Test Application1 For Trailer Abs Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU’s to communicate with the tractor ECU via the J560 power line activate the warning lamp. NEXIQ’s PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy use and provides the ability to: Verify trailer ABS ECU for MID 10 and MID 11 messages. Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation. Test tractor and trailer coupled or trailer independently for MID messages. Requires NEXIQ PLC Converter Kit (PN 601020)

1 of 1
SearchSpring