Punches
| 1 | 2 | 3 | of | 43 | next |
Sort By:
|
Carded Hard Cap Pin Punch 1/8in. x 7in. Item #: 0 Carded Hard Cap Pin Punch – 1/8in. x 7in. No. KEN-66422 Carded Hard Cap Pin Punch – 1/8in. x 7in. Carded Hard Cap Pin Punch – 1/8in. x 7in. Features: Hard Cap has reinvented the struck tool by adding an unbreakable space-age polymer cap and... warranty Made in the USA Specifications: Pin Punch Body Diameter: 3/8 Pin Length: 1-5/8 Punch Size: 1/8 Overall Length: 7 |
|
Item #: 0 5/32� x 5� Pin Punch - 413-pitch No. MAY-21003 5/32� x 5� Pin Punch - 413-pitch 5/32� x 5� Pin Punch - 413-pitch Features: Ideal for driving out and removing already loosened pins and keys after initial movement by a solid punch... Specifications: Tip Size: 5/32 " Stock Size: 5/16" Stock Shape: Hex Overall Length: 5" Material: Alloy Steel Finish: Black Oxide Tip Type: Round Type: Pin Punch |
|
900 Peak Amp Ultraportable 12 Volt Jump Starter with Light Item #: 0 Ultra-Portable 900 Peak Amp Jump Starter No. JNC-JNC300XL Ultra-Portable 900 Peak Amp Jump Starter A great balance of power and portability, the JNC300XL packs the punch of 900 Peak Amps of starting power into a unit that weighs just 9 lbs. This |
|
Die Setter Bar 5/8in. Stock, 18in. Length Item #: 0 Die Setter Bar – 5/8in. Stock, 18in. Length No. KEN-7035 Die Setter Bar – 5/8in. Stock, 18in. Length Die Setter Bar – 5/8in. Stock, 18in. Length Features: A practical and useful shop tool for the quick separation of punch and die holder. The bars |
|
Center It Tool Drill Press V-Block Item #: 0 be centered on the tube with no center punching required. If tubing is too large to drill in a single operation it can simply be turned over. Especially for the woodworking hobbyist, the metalworking enthusiast, and even the professional automotive |
|
Item #: 0 Black Oxide Pin Punch – 3/32in. No. MAY-21006 Black Oxide Pin Punch – 3/32in. Black Oxide Pin Punch – 3/32in. Note: Individual product image unavailable; similar product MAY-21217 shown for illustrative purposes only Features: Made in the USA |
|
3/16in. Line-Up Punch 467-Pitch Item #: 0 3/16in. Line-Up Punch 467-Pitch No. MAY-22012 3/16in. Line-Up Punch 467-Pitch 3/16in. Line-Up Punch 467-Pitch Features: Full finish Ideal for aligning holes in metal pieces through which rivets, pins or bolts are inserted Made in the USA Lifetime... Warranty Specifications: Tip Size: 3/16in. Stock Size: 1/2in. Stock Shape: Hex Overall Length: 10in. Material: Alloy Steel Finish: Black Oxide Tip Type: Round Type: Pin Punch |
|
Item #: 0 Punch and Chisel Set (16-Piece) OTC No. OTC-4600 Punch and Chisel Set (16-Piece) OTC Durable set of heat-treated chrome vanadium steel punches and chisels. Set Includes: 3 ea. Cold chisels (with gauge): 3/8" x 5-1/2"; 1/2" x 6"; 5/8" x 6-1/2" 2 ea.... Center punches: 1/8" x 5"; 3/16" x 6" 5 ea. Pin punches: 3/32" x 4-1/4"; 1/8" x 4-3/4"; 5/32" x 5"; 3/16" x 5-1/4"; 1/4" x 5-3/4" 5 ea. Taper punches: 3/32" x 5-1/4"; 1/8" x 5-3/4"; 5/32" x 6"; 3/16" x 6-1/4"; 1/4" x 6-3/4" Storage tray included. |
|
|
Item #: 0 |
|
Item #: 0 1/2in. Hollow Punch No. MAY-50507 1/2in. Hollow Punch 1/2in. Hollow Punch Features: Used to make gaskets, washers, and sealing rings in different materials. Dual cutting heads. Made in the USA Lifetime Warranty Specifications: Material: Alloy... Steel Finish: Black Oxide Tip Type: Round Type: Hollow Punch |
|
1/4in. x 14in. Extra Long Taper Line-Up Punch - 462-pitch Item #: 0 1/4in. x 14in. Extra Long Taper Line-Up Punch - 462-pitch No. MAY-22007 1/4in. x 14in. Extra Long Taper Line-Up Punch - 462-pitch 1/4in. x 14in. Extra Long Taper Line-Up Punch - 462-pitch Features: Full finish Ideal for aligning holes in metal... pieces through which rivets, pins or bolts are inserted Made in the USA Lifetime Warranty Specifications: Tip Size: 1/4in. Stock Size: 1/2in. Stock Shape: Hex Overall Length: 14in. Material: Alloy Steel Finish: Black Oxide Tip Type: Round Type: Pin Punch |
|
Item #: 0 1/4in. Hollow Punch No. MAY-50503 1/4in. Hollow Punch 1/4in. Hollow Punch Features: Used to make gaskets, washers, and sealing rings in different materials. Dual cutting heads. Made in the USA Lifetime Warranty Specifications: Material: Alloy... Steel Finish: Black Oxide Tip Type: Round Type: Hollow Punch |
|
Air Hammer Tap Punch - 7in., .401in Shank Item #: 0 7in. Punch - Tapered, .401in. Shank No. CPT-A046078 7in. Punch - Tapered, .401in. Shank 7in. Punch - Tapered, .401in. Shank |
|
Handle for 11pc. Hollow Punch Kit Item #: 0 Handle for 11pc. Hollow Punch Kit No. MAY-50490 Handle for 11pc. Hollow Punch Kit Handle for 11pc. Hollow Punch Kit Features: Made in the USA Lifetime Warranty |
|
31pc. 2mm to 50mm Hollow Punch Tool Kit Item #: 0 31pc. 2mm to 50mm Hollow Punch Tool Kit No. MAY-66006 31pc. 2mm to 50mm Hollow Punch Tool Kit 31pc. 2mm to 50mm Hollow Punch Tool Kit Specifications: Used to make gaskets, washers, and sealing rings in different materials. Dual cutting heads. Made... in the USA Lifetime Warranty Set Includes: Hollow Punch Sizes:2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm Handle Case |
|
Item #: 0 2in. Hollow Punch No. MAY-50525 2in. Hollow Punch 2in. Hollow Punch Features: Used to make gaskets, washers, and sealing rings in different materials. Dual cutting heads. Made in the USA Lifetime Warranty Specifications: Material: Alloy Steel... Finish: Black Oxide Tip Type: Round Type: Hollow Punch |
|
|
Item #: 0 413-1/16 Pin Punch |
|
Item #: 0 Extractor Punch No. LOC-LT-400-7 Extractor Punch Extractor Punch |
|
|
Item #: 0 |
|
|
Item #: 0 Punch Plate |
|
Item #: 0 3/8in. Hollow Punch No. MAY-50505 3/8in. Hollow Punch 3/8in. Hollow Punch Features: Used to make gaskets, washers, and sealing rings in different materials. Dual cutting heads. Made in the USA Lifetime Warranty Specifications: Material: Alloy... Steel Finish: Black Oxide Tip Type: Round Type: Hollow Punch |
|
Item #: 0 Professional Brass Hammer and Punch Set No. OTC-4606 Professional Brass Hammer and Punch Set Professional Brass Hammer and Punch Set Features: Brass-head hammer and punches are ideal to use where sparks from ferrous metals would be hazardous, or... where precision metal parts could be damaged by steel tools. Hammer head weighs 24 oz.; brass drift punch is 10" x 3/4" diameter; brass tapered punch is 8" x 5/8" hex tapered to 3/8" diameter point. |
|
Flaring and Swaging Tubing Tool Set 45 Degree Item #: 0 tools and swaging tools. Brake, transmission cooler and fuel lines can be fabricated with these quality tools. Durable forged steel slip-on yoke. Bars are chrome plated, hardened steel. Swages in close quarters where punch style cannot be used. Set |
|
Item #: 0 Punch & Chisel Set Quick-Change No. OTC-4605 Interchangeable Punch and Chisel Set OTC Features: Safety protective handle allows easy grip and protects hand from being hit by hammer. Quick-Change Interchangeable Punch and Chisels Double locking ball... detent holds punch or chisel securely in the driver handle. Set Includes: 5 flat chisels: 1/2in., 5/8in., 3/4in., 7/8in., and 1in. wide blades 1 cape chisel: 1/4in. wide blade 2 taper punches: 1/8in. and 1/4in. diameter 2 pin punches: 3/16in. and 1/4in. |
| 1 | 2 | 3 | of | 43 | next |
Company Information
Call free in the U.S. and Canada
800.939.8665
Local and International
206.926.3804
Fax free in the U.S. and Canada
888.866.5329
Local and International
206.926.3805
Office Hours: Monday - Friday, 8:30am to 5:30pm EST
© Copyright 2012 Network Tool Warehouse.
All Rights Reserved.