Basic Fuel Injection Pressure Tester w/Case No. STR-TU-448PB Basic Fuel Injection Pressure Tester w/Case For all systems, except Bosch C.I.S. and GM T.B.I. Applications: This set includes everything to test the following: Bosch AFC, MPC, Digijet / Digifant – except C.I.S. Chrysler Corporation Ford Motor Company General Motors – except T.B.I. Japanese fuel injection systems Others using Bendix-type fuel injection or Schrader-type valve, including the small Schrader valve found on Ford products. Features: Quick Coupler connection at the end of the gauge hose makes a speedy and efficient coupling possible with the adapters. The 2 ½ inch gauge has a dual scale dial with ranges from 0 – 100 psi and 0 – 7 bar. Hook on gauge enables the Technician to hang up gauge and hose assembly to free his hands. Has a multitude of adapters, Banjo Bolts, and 16-inch gauge hose assembly. Packaged in a durable, red blow-molded case for easy access to equipment and for manageability.
Schrader Adapter for International Trucks No. STR-TU-32-23 Schrader Adapter for International Trucks Schrader adapter is a hose assembly with a male quick-connect plug on one end and an International Schrader adapter on the other. Applications: Used to connect a pressure gauge to the engine fuel system. Fits Schrader test ports on the fuel system of International Diesel engines and Ford Power Stroke (1994-1997) diesel engines.
Master Fuel Injection Service Tool Kit No. OTC-6550 Master Fuel Injection Service Tool Kit Test fuel injection systems on most GMs, including GM TBI, Ford, Chrysler, and Jeep vehicles. Also works on imports, including CIS and CISE fuel systems. With this new kit you can diagnose fuel-related problems, such as a weak fuel pump or restricted fuel filter, and perform leak-down tests. Kit Includes: 0–100 PSI fuel pressure gauge and 35 of the popular OTC fuel injection adapters, each equipped with a quick-connect Schrader valve for safety. Packaged in plastic storage case. Replacement seal kit also included.
Adapter Kit for Fuel Injection Pressure Tester No. INN-3649 INNOVA Adapter Kit for Fuel Injection Pressure Tester Adapter Kit for Fuel Injection Pressure Tester Features: Includes four schrader valves Designed to identify and diagnose low fuel pressure, a faulty fuel pressure regulator, leaking injector, fuel leaks or clogged fuel filters. Made from high quality material Ensures long lasting durability Easy to use
Schrader Adapter for International Trucks No. STR-TU-32-24 Schrader Adapter for International Trucks International Right Angle adapter is a right angle adapter with a male quickconnect plug on one end and an International Schrader adapter on the other. Applications: Used to connect a pressure gauge to the engine fuel system. Fits Schrader test ports on the fuel system of International Diesel engines and Ford Power Stroke diesel engines.
GM TBI Fuel Injection thru Filter Test Set w/Manifold Features:This set has adapters for testing fuel pressure at the filter on GM TBI fuel systems.A great time-saver when comparing old style testing under the hood.Selecting the same adapter as the fuel filter, the adapter can then be screwed onto manifold by hand.Can be used with ALL Star Products Fuel Injection Testers and Cleaners, or others with a standard Schrader adapter.
GM TBI Fuel Injection thru Filter Test Set Features:This set has adapters for testing fuel pressure at the filter on GM TBI fuel systems.A great time-saver when comparing old style testing under the hood.Selecting the same adapter as the fuel filter, the adapter can then be screwed onto manifold by hand.Can be used with ALL Star Products Fuel Injection Testers and Cleaners, or others with a standard Schrader adapter.
Redline EVAP Service Port Adapter w/Schrader Valve Removal Tool Features:The service port adaptor connects to the OBD ll service port to allow access to the EVAP system. A Schrader valve removal tool is included with the service port adaptor. Suitable for use with any Smoke Machine.
OTC LeakTamer – Smoke Machine EVAP Tester No. OTC-6522 OTC LeakTamer – Smoke Machine EVAP Tester Smoked Out – Find the Leak. Clear the Code. Smoke the Test. Put better technology and portability in your shop with OTC's new and improved smoke machine. This unit is half the size of its predecessor, but twice as mighty with more powerful features. Features: Dealer Recommended, OEM Tested. Market Leading Smoke Technology. Quickly diagnose and repair a leading cause of check engine lights. 80% of top codes can be diagnosed with smoke technology. UltraTrace UV Dye the only OE approved solution. New smoke flow control adjusts for specific applications. Detects microleaksTM to and below .010in. Kit Includes: Leak Tamer Unit White/UV Combination with Laser Pointer UV Glasses for viewing UltraTrace UV dye Service Port Adapter Exhaust Adapter Cone Cap Plug Adapters Schrader Removal/Installation Tool UltraTrace UV Smoke-Producing Solution
ICS Kit – Fuel System Intake Cleaning KitThe ICS (Intake Cleaning System) kit is part of the Carbon Clean System. Use it in conjunction with the Carbon Clean Service or on it’s own as part of a regular maintenance program. The ICS cleaning procedure cleans the intake plenum and the intake manifold runners by utilizing the convenient spray bottle along with MV4 detergent. The MV4 detergent’s foaming action clings to the walls of the plenum and intake manifold runners to safely dissolve the gum and varnish buildup. Includes:(1) 060-1600 12mm Banjo Fitting CIS Or EFI Systems (1) 060-1602 12mm 90 Degree Banjo Fitting CIS Or EFI Systems (2) 060-2402 14mm Banjo Fitting Pressure Line (1) 060-3508 “Test Port/Schrader Valve” Connection FORD (1) 060-3700 “Test Port/Schrader Valve” Connection GM (2) 060-3900 5/16in. Quick Disconnect - Port Fuel And TBI (1) 060-3901 3/8in. Quick Disconnect - Port Fuel And TBI (1) 060-4300 3/8in. TBI And/Or Port Fuel
Professional Master Fuel Injection Service Kit No. OTC-6550PRO Professional Master Fuel Injection Service Kit Professional Master Fuel Injection Service Kit The new 6550PRO Professional Fuel Injection Master Fitting Kit from OTC puts a full coverage fuel system service kit in your toolbox & greater service opportunities in your shop! Perform fuel pressure testing, diagnose weak fuel pumps or restricted filters, test for fuel flow & perform leak-down tests. Use to clean injectors & intake systems. Features: Comes with an analog fuel pressure gauge. The pressure testing manifold is designed with a bypass valve letting the technician perform basic fuel flow assessments. Domestic, Asian & European – Each adapter works with Schrader valve fittings to ensure user safety by preventing fuel spray when connecting or disconnecting the pressure gauge (included), the fuel line, or an accessory like a cleaning canister. All seals & o-rings are made with highly durable Viton material to prevent swelling or cracking when exposed to gasoline, alcohol blends & even the most aggressive injector cleaning chemicals. Comes with an Application Manual (6550MAN-08) showing technical references for Make/Model/Year, Engine for vehicles produced between 1997 & 2008 – inclusive. We include Fuel Injection system, OE Fuel Pressure ranges, Fuel Pump Access point & disabling reference, OTC adapter reference & fuel line access locations for virtually FULL VEHICLE COVERAGE. Includes: 0 – 100 PSI Fuel Pressure Gauge gives precise pressure readings as well as a view of pressure sweeps during the testing analysis. 47 OTC fuel injection system adapters each with a quick connect Schrader Valve - more adapters than any other kit we’ve found giving the best coverage of any kit on the market! 1997 – 2008 Fuel Injection Service Application Manual Replacement Seal Kit
Redline Smoke Pro Tech-Mate Plus Kit Features:Smoke Pro Tech-Mate Plus is designed for the garage that needs a smoke machine that can quickly and easily diagnose, approximate, and pinpoint leaks in variety of systems. Smoke Pro Tech-Mate Plus is the utilitarian and economical diagnostic solution for any multi-functional repair shop.NO RISK 30 Days or 100% Money Back Guarantee Includes:(1) Smoke Pro Tech-Mate Plus (1) OEM-Approved Smoke Agent (1) Halogen Inspection Light (1) EVAP Service Port Tool (1) EVAP Schrader Valve Removal Tool (1) Cap Plug Kit (1) Exhaust Cone Adapter (1) Plastic Accessory Case (1) Training DVD Specifications EVAP Weight 6 lbs. Shipping Weight 12 lbs. Dimensions 6 x 6 x 12 in. Operating Modes Air/Gas Only Cycle; Smoke Cycle Operating Temperature 0-deg. F to 120-deg. F (-17-deg. C to 42-deg. C) Operating Humidity No Limit Operating Altitude No Limit Minimum Leak Detection 0.010” Smoke Chamber Assembly Bolted Smoke Chamber Warranty Lifetime External Pressure Supply Shop Air, Nitrogen, Inert Gas